Recent content by billybobxxx

  1. B

    Hacking Hardware Picofly - a HWFLY switch modchip

    Just find this on aliexpress for core switch! :)
  2. B

    HELP - ps4 pro with ripped off power supply connector and 5v stby shorted to ground

    I have purchased a ps4 pro with power connector ripped out of the motherboard and the 5v stby (yellow pad on my picture) is shorted to ground..i test several capacitor all ok..i also remove the southbridge but 5v stby still shorted to ground..any idea what it could be? I dont know what to test now.
  3. B

    Hardware [HELP] PS4 Pro CUH-71XXX Power Supply Connector Ripped Off

    I have purchased a ps4 pro with power connector ripped out of the motherboard and the 5v stby (yellow pad on my picture) is shorted to ground..i test several capacitor all ok..i also remove the southbridge but 5v stby still shorted to ground..any idea what it could be? I dont know what to test now.
  4. B

    Hacking Hardware Picofly - a HWFLY switch modchip

    Does the led on the rp2040 is supposed to turn red when you flash the .bin with toolbox like when you flash with the uf2 file?
  5. B

    Hacking Hardware Picofly - a HWFLY switch modchip

    Just upgraded my emmc today for a 128gb sk hynix..emmc arrived already reballed. Works like a charm! 😁 Next time i will try with a 256gb but its much more expensive.
  6. B

    Hacking Hardware Picofly - a HWFLY switch modchip

    Not because it's cheap mean that it's easy...The installation is more difficult than a hwfly! So before you start make sure you have the skills and the right tools 🤷🏼‍♂️
  7. B

    Hacking Hardware Picofly - a HWFLY switch modchip

    Maybe because the code (uf2 file) is specifically made for the rp2040-zero 🤔
  8. B

    Hacking Hardware Picofly - a HWFLY switch modchip

    Exact
  9. B

    Hacking Hardware Picofly - a HWFLY switch modchip

    My flex cable have pin 3 and 4 shorted and works well
  10. B

    Hacking Hardware Picofly - a HWFLY switch modchip

    I use button from an old ps3 power button..cannot have more flat push button! 😁
  11. B

    Hacking Hardware Picofly - a HWFLY switch modchip

    Try to remove the 20 ohm resistor on the reset..try without anything. If its not working you can try with 20k ohm or 30k ohm on rst point.
  12. B

    Hacking Hardware Picofly - a HWFLY switch modchip

    you need this pin...dont seem to have SPI1 TX anywhere on this tiny2040 but you can give a shot to pin 3 or 7 on you tiny2040 maybe it will work because its also I2C1 SCL its my guess....
  13. B

    Hacking Hardware Picofly - a HWFLY switch modchip

  14. B

    Hacking Hardware Picofly - a HWFLY switch modchip

    We can remove this caps and the switch will still works without any problem?
  15. B

    Hacking Hardware Picofly - a HWFLY switch modchip

    your mosfet is not connected correctly...check the mosfet pinout on my picture. Another thing i have no sucess with wire and the left apu cap connected with just one mosfet i have to solder mosfet directly to left apu cap without wire. If i dont do that and put wire no mather the size and lenght...
See more