Recent content by bilalhassan341

  1. bilalhassan341

    Hacking Hardware Picofly - a HWFLY switch modchip

    Emmc points are not soldered correctly. resolder or try to add another resisters on emmc points.
  2. bilalhassan341

    Hacking Hardware Picofly - a HWFLY switch modchip

    sometimes getting crashed while updating software which happened to me. I had a switch which is updating and crashed. I installed the picofly just to restore the nand.
  3. bilalhassan341

    Hacking Hardware Picofly - a HWFLY switch modchip

    Taking the backup of prod key is a must for me, before closing the switch back cover. I take the backup on the first run to hekake.
  4. bilalhassan341

    Hacking Hardware Picofly - a HWFLY switch modchip

    Take prod key from switch by using lockpickrcm. Use the sthethix level 1 unbricking video to rebuild the firmware. if the level 1 didn't work, move to level 2. You can also confirm the firmware or nand pertitions are correct by using nxnand manager by selecting prod key and partition, it will...
  5. bilalhassan341

    Hacking Hardware Picofly - a HWFLY switch modchip

    It is a adapter issue.🥲
  6. bilalhassan341

    Hacking Hardware Picofly - a HWFLY switch modchip

    reballing with heat gun is much better than drilling in switch board. 1691832678
  7. bilalhassan341

    Hacking Hardware Picofly - a HWFLY switch modchip

    mine is around 50. 42 is fine. btw it depend on weather also😂😂
  8. bilalhassan341

    Hacking Hardware Picofly - a HWFLY switch modchip

    Hi @rehius , I wanted to express my gratitude for the incredible effort you put into creating this mod. Thanks to your mod, I was able to sell some modded switches and generate enough money to purchase a new MacBook Pro and Sony Xperia 1 V. I am truly thankful to you for enabling me to achieve...
  9. bilalhassan341

    Hacking Hardware Picofly - a HWFLY switch modchip

    Like, solder debris or particles leaved by soldering iron can get stuck under apu or dram. Which can cause short on these components.
  10. bilalhassan341

    Hacking Hardware Picofly - a HWFLY switch modchip

    But there is a difference between you and us🥲. You're the pro guy whose soldering pics are used as a sample in picofly main post. Edit: the first switch I bought had a blue screen. but full new no scratch only 3 weeks used. I got it for 60$ only tablet and joycons(Plus Free Original Charger...
  11. bilalhassan341

    Hacking Hardware Picofly - a HWFLY switch modchip

    Most of them are oled which got killed. So, oled is hard to mod if anyone is doing it first time or never done v1 or v2 or lite. There is good point don't mod oled on your first hit.
  12. bilalhassan341

    Hacking Hardware Picofly - a HWFLY switch modchip

    For 0.1mm wire: Soldering Wire 0.1mm PCB Link Jumper Wire https://a.aliexpress.com/_mOj9L1Q For 0.2mm wire: Copper lacquer wire0.1mm -0.9mmCable Copper Wire Magnet Wire Enameled Copper Winding Wire Coil Copper Wire https://a.aliexpress.com/_mrluwPe Just select 0.2 mm in length option. These...
  13. bilalhassan341

    Hacking Hardware Picofly - a HWFLY switch modchip

    Yes, awg 36 or 0.1mm wire. Using a thicker can higher the chances of pads getting ripped off from the board. And it is not easy jumper the pads, you need proper equipment like heat gun or solder balls (Also, Scratching the boards for traces:whip:). So, use awg36 or 0.1mm for all and for mosfet...
  14. bilalhassan341

    Hacking Hardware Picofly - a HWFLY switch modchip

    Update it to 2.73, by using toolbox. 2.74 is removed due to unstablility. I tested this firmware, it never worked on my switch. I also rolled back. But I never tested on my other switches. Some people have this because 2.74 has faster glitch which some people said. But Rp2040 can be fried also...
  15. bilalhassan341

    Hacking Hardware Picofly - a HWFLY switch modchip

    What is the format of the SD card if it is Exfat change it to fat32.
See more