Recent content by atlasco

  1. A

    UART Code 80060004 - 1sec BLOD - Unknown code (Solved!)

    Yes, according to the thermal examination, that mosfet and the one next to it are always working with the console on, the other 4 following ones work together with these when the PS5 requires power (launching a game)... that's what I think, that's why those 2 mosfets are the ones that should be...
  2. A

    UART Code 80060004 - 1sec BLOD - Unknown code (Solved!)

    Yes, of course, you can see it in the photo. It's also different from the other PS5. Everything works fine now. Thanks for sharing.
  3. A

    UART Code 80060004 - 1sec BLOD - Unknown code (Solved!)

    The exact same thing happened to me on a PS5. In my case, the console almost always turned on, but when I started a game, it usually turned off, although sometimes I would spend a while playing. Checking with a thermal camera, when starting a game, that mosfet heated up less than the others...
  4. A

    PS5 EDM-030 3 sec BLOD and sometimes quick white with no display

    The standby current cycle should reach 316~~mah but if it only reaches 300 mah it is bad and could be a problem among others with the Panasonic IC or WiFi IC. If the consumption is correct, it is a worse symptom since there is a high percentage of it being a damaged APU.
  5. A

    Ps5 3 second blod , error uart : 80830000,... N

    Try it, but if it is a damaged APU there is no solution. the solution is a new motherboard
  6. A

    PS5 UART commands

    I had a case like this, see my post. See failure in ram with thermal camera, .. but it is probably damaged apu. On ps5 there is a large percentage of damaged apu.
  7. A

    PS5 UART commands

    Hello, I found new errors on a ps5 with possible damaged ram (all) and damaged Apu, the console presented an error: 80830000LowShutdown or Freeze After SAM_IPL Loaded - GDDR6 Data Line Issue (Replace) The new error codes : 808016F0 High Not found in list. Report Findings. 80801630 High Not...
  8. A

    Ps5 3 second blod , error uart : 80830000,... N

    When the PCB is very big and dissipates a lot of heat it always tends to bend a little, you have to preheat it well beforehand. In the video it seems that it bends more than in reality, even so the reballing turned out well,... but I was already expecting the result. These Ps5 are not turning...
  9. A

    Ps5 3 second blod , error uart : 80830000,... N

    Hello, I'm telling you about the attempted repair of this PS5 that arrives without turning on, 3 seconds and turns off. Check all voltages, there are no shorts. Using uart method gives me the error 80830000 Low Shutdown or Freeze After SAM_IPL Loaded - GDDR6 Data Line Issue (Replace) I check...
  10. A

    PS5 UART commands

    Hi, I have the same error, were you able to solve it?
  11. A

    PS5 UART commands

    After reflowing the Apu, the result is even worse, now there is also a very low resistence at the output of one of the ram sources.(It should be 40 ohm). The APU is short, no solution. in case it helps anyone. and the code that continues to show is this (although it varies a little): 00...
  12. A

    PS5 UART commands

    Hi @stetofix , I told you about a problem on your YouTube channel, in uart it gives me the error OK 00000000 80810001 FFFFFFFF FFFF0023 00000100 217F 0016 40A0 0000:96 I think it is apu. things that I did: - It has all the voltages -no metal liquid splits - there are no shorts -with a thermal...
See more