Recent content by achillebrac07

  1. achillebrac07

    Hacking Hardware Misc Switch oled shorted and not booting after picofly install

    So i have a oled here that i tried to mod it, everything went fine until i soldered the wires to the chip, the chip showed bad wiring message or bad chip, so i tried to re solder everything on the chip and this did not fix the issue, afterwards i tried to swap the chip and there it came the...
  2. achillebrac07

    new 3ds hardbricked after a ctrtranfer 2.1, i'm trying to restore back my nand with hardmod but...

    My cartridge is fine i was able to boot into godmode9, it is a r4i 3ds rts wi-fi and yes i’m doing the combo (X+selct+start+magnet under the a and b button) Explanation: the white flashing (as expected) was the hardware check, it was missing connection with a ribbon cable (i don’t know but it...
  3. achillebrac07

    new 3ds hardbricked after a ctrtranfer 2.1, i'm trying to restore back my nand with hardmod but...

    The 3ds it’s alive, it can’t boot because it’s not on native fw, there isn’t any problem with hardware as far as I know. It does the same black screen, Even after I opened it to solder the cables. This afternoon if i can i’ll post pic of the wires 1695813041 ok now for some reason it boots with...
  4. achillebrac07

    new 3ds hardbricked after a ctrtranfer 2.1, i'm trying to restore back my nand with hardmod but...

    And the other things that i tried are done BEFORE opening the console and doing the hardmod so I don’t think it’s an mcu brick
  5. achillebrac07

    new 3ds hardbricked after a ctrtranfer 2.1, i'm trying to restore back my nand with hardmod but...

    I don’t have b9s installed so any led will pop up
  6. achillebrac07

    new 3ds hardbricked after a ctrtranfer 2.1, i'm trying to restore back my nand with hardmod but...

    I flashed myself before the brick to mod another 3ds and it worked fine 1695676636 Well If it would have worked I would not have tried the hardmod method. Maybe I'm doing something wrong, but it's very strange I've made a lot of attempts and none of these worked
  7. achillebrac07

    new 3ds hardbricked after a ctrtranfer 2.1, i'm trying to restore back my nand with hardmod but...

    I tried it a couple of times and it doesn’t work, I also held the buttons down for a long time but nothing
  8. achillebrac07

    new 3ds hardbricked after a ctrtranfer 2.1, i'm trying to restore back my nand with hardmod but...

    Yes in fact i fixed it, but now it’s bricked and i can’t really do anything Except for ntrboot and hardmod
  9. achillebrac07

    new 3ds hardbricked after a ctrtranfer 2.1, i'm trying to restore back my nand with hardmod but...

    Errors like the white led of b9s or failed to apply_ firm 1 or unable to mount CTRNAND
  10. achillebrac07

    new 3ds hardbricked after a ctrtranfer 2.1, i'm trying to restore back my nand with hardmod but...

    Actually I wasn’t able to boot properly with b9s so i uninstalled it and did the forced ctrtransfer , after that bricked
  11. achillebrac07

    new 3ds hardbricked after a ctrtranfer 2.1, i'm trying to restore back my nand with hardmod but...

    i don’t have my 3ds now in my hands, i used the “alternative” CLK point (this one) . I tried to install a9lh just for discover the old modding scene
  12. achillebrac07

    new 3ds hardbricked after a ctrtranfer 2.1, i'm trying to restore back my nand with hardmod but...

    a9lh need 2.1 to be installed
  13. achillebrac07

    new 3ds hardbricked after a ctrtranfer 2.1, i'm trying to restore back my nand with hardmod but...

    i bricked my 3ds while trying to install a9lh, so i had to remove b9s first. i still have the good nand files to flash it back, but it doesn't show a bootrom error on boot, only a black screen (like usual). the wiring is fine, the only thing that probably matters is that i didn't soldered the...
See more