abal1000x's latest activity
-
abal1000x replied to the thread Hacking Hardware Picofly - a HWFLY switch modchip.Gate should not have continuity with the ground, it should not beep. I am still on travelling, can't confirm this. Reading from this thread, i think theres bad quality mosfet. Luckily i have not meet with those bad quality mosfet. For me, the... -
abal1000x replied to the thread Hacking Hardware Picofly - a HWFLY switch modchip.Its normal. Its not totally zero ohm, theres ohm around 3-5ohms, in my multimeter.
-
abal1000x replied to the thread Picofly AIO Thread.The main suspect is the mosfet, try to change it. Second is the emmc line cmd/dat0/clk. Make sure the solder are good enough.
-
abal1000x replied to the thread Picofly AIO Thread.Try to update to last firmware version for better diagnose. https://github.com/rehius/usk/releases
-
abal1000x replied to the thread Hacking Hardware Picofly - a HWFLY switch modchip.Maybe the cpu got overheated and desolder itself. (Do you forget to put the thermal paste?) Try to reheat it, and crossfinger, hopefully its worked.
-
abal1000x replied to the thread Hacking Hardware Picofly - a HWFLY switch modchip.From the link that hassal give in the past Also by experience, that is inductor not capacitor. Inductor usually have rough surface compare to capacitor.
-
-
abal1000x replied to the thread Hacking Hardware Picofly - a HWFLY switch modchip.try use the latest fw 275
-
abal1000x replied to the thread Hacking Hardware Picofly - a HWFLY switch modchip.Might try to reheat it little bit, maybe it got too heated before and accidentally desolder itself. 1712611136 What version of the fw you used? 1712611573 Clean with IPA from the residue than use lot of flux. If necessary, use a bigger tip...
-
abal1000x replied to the thread Picofly AIO Thread.Mosfet will throws different error, at a different stage. RST error detected in the earliest detection, before any else, so its the first detection. Picofly throws RST error because the voltage read on RST line is not on the range 1.6V - 2.0V...
-
-
abal1000x replied to the thread Hacking Hardware Picofly - a HWFLY switch modchip.Looking the error such as RST wire, then D0 error, then plug and unplug the battery. Seems like theres common issue. The RST might occured because the 3.3V power goes to rp2040 is not 3.3V. The D0 error similar to RST, checking the voltage and...
-
abal1000x replied to the thread Picofly AIO Thread.Especially for RST error theres another possibility which is the voltage you use is under normal 3.3.V The calculation inside the firmware for voltage detection lay on assumption that you supply 3.3V to the rp2040. RST is the first voltage range...
-
abal1000x replied to the thread Hacking Hardware Picofly - a HWFLY switch modchip.awg40 insulated (not enameled). You could bought it on aliexpress for as short as 10meter. Something like this https://www.aliexpress.com/item/1005003682556719.html I bought on different store though (the cheapest one around 3$ for 10m), its...
-
abal1000x reacted to unicornman's post in the thread Homebrew Homebrew app sys-patch - sysmod that patches on boot with
Love.
It doesn't conatin that pattern for the reason that pattern is found in two places in the file, instead of just the one. Searching for: a0.0091..0094a0..d1..ff97 Pattern found at offset: 0x0006973C (431932) Pattern found at offset: 0x0006A044... -
abal1000x replied to the thread Hacking Hardware Picofly - a HWFLY switch modchip.Try using OFW then write something to the microsd. If its corrupted than its for sure the hardware (not from software such as hekate, atmosphere, etc). I feel its more about hardware, like something is shorting the power line, consistently...
-
abal1000x replied to the thread Hacking Hardware Picofly - a HWFLY switch modchip.Is it worth your time to investigate that lol. If i were you, simply use the working one. And spent my time for something more valuable. But if you want to goes down to that road. You said you've used the standard hekate + atmosphere, and the...
