Recent content by 1337_Ninja

  1. 1

    Hacking Hardware Picofly - a HWFLY switch modchip

    I don't know about anyone else, but I'd think a video guide on how to reball the emmc with a permanent adapter would be very helpful.
  2. 1

    Hacking Hardware Picofly - a HWFLY switch modchip

    It's apparently working after replacing a few resistors.
  3. 1

    Hacking Hardware Picofly - a HWFLY switch modchip

    I'm aware. It's reported that the Tiny board uses 470ohm which need to be removed and replaced with 47ohm, like I said in the previous reply.
  4. 1

    Hacking Hardware Picofly - a HWFLY switch modchip

    Yes. It seems some users are reporting you have to remove the 470ohm resistors on the board and replace them with the 47ohm. If this chip was made with the switch in mind then they accidentally used 470 instead of 47. I'm waiting on mine so I can't confirm myself, but it seems to work with that...
  5. 1

    Hacking Hardware Picofly - a HWFLY switch modchip

    I just want to make sure I'm understanding this correctly. You remove the 470ohm resistors from the board, bridge those 3 points with solder, and then add the 47ohm resistors to the solder joints like the regular 2040-zero chip? Are you using the 0805 size resistors? Thanks so much for your help.
  6. 1

    Picofly AIO Thread

    I believe this adapter is only for the OLED. No need for the Lite or V2
  7. 1

    Hacking Hardware Picofly - a HWFLY switch modchip

    Is there anyway you can give us proof of this? Or can someone else confirm?
  8. 1

    Hacking Hardware Picofly - a HWFLY switch modchip

    One person post a video of an install and it wasn't booting. Not sure if it's working or not, waiting for confirmation. I'd assume it is working or will be soon.
  9. 1

    Hacking Hardware Picofly - a HWFLY switch modchip

    My fault. I misread that 24-25 needed to be bridged for the color code switch. Definitely makes more since to ground one. Still, I hope someone gets the 2040-Tiny board to work. Seems like a great solution.
  10. 1

    Picofly AIO Thread

    I know the RP2040-Tiny isn't officially supported yet, but I was wondering if anyone had success with one yet. Seems like the best option if it works
  11. 1

    Hacking Hardware Picofly - a HWFLY switch modchip

    I could be wrong, but did he bridge 25 and ground instead of 24 and 25? 1683609346 I could be wrong, but did he bridge 25 and ground instead of 24-25?
See more