Hello Everyone
This is a DS version or port if you want to call it that of retrobox. To learn more about it go to the author's site.
http://www.geocities.com/retropoint/
To start press A for Emu 1 which is the sample emu that came with retrobox for devers. Press B for Emu 2 which is my NES emulator Reminesce. There are other emulators running on retrobox but unfortunately Reminesce and the SampleEmu are the only ones that does not have any assembly in it.
Press L to switch between display modes. When you get to the orginal size mode you can use R to toggle from to bottom (it also works if you are not in that mode).
By defualt the rom you are using was made by a friend of mine. It is NeSnake by Matrixz (http://elazulspad.net/matrixz/).
To replace the rom insert it at the address 36B08h for retroboxDS.nds and 36D08h for retroboxDS.ds.gba. If you dont have any programs that do this (some hex editors do it) you can use File Mold.
To inject with file mold open it up, go to mode and select inject. Draw & drop the injection file and target (or use the buttons to select them) and use the appropriate offset.
The Injection file would be the rom you want and the target is retrobox .nds or .ds.gba. So use 36B08 for the .nds and 36D08 for the .ds.gba.
This has been tested on hardware if there is any problems post and i'll do my best to help you. Be sure your rom isnt corrupted, and that you use right offset and if it does runs on Reminesce (http://sourceforge.net/projects/reminesceemu).
This is a DS version or port if you want to call it that of retrobox. To learn more about it go to the author's site.
http://www.geocities.com/retropoint/
To start press A for Emu 1 which is the sample emu that came with retrobox for devers. Press B for Emu 2 which is my NES emulator Reminesce. There are other emulators running on retrobox but unfortunately Reminesce and the SampleEmu are the only ones that does not have any assembly in it.
Press L to switch between display modes. When you get to the orginal size mode you can use R to toggle from to bottom (it also works if you are not in that mode).
By defualt the rom you are using was made by a friend of mine. It is NeSnake by Matrixz (http://elazulspad.net/matrixz/).
To replace the rom insert it at the address 36B08h for retroboxDS.nds and 36D08h for retroboxDS.ds.gba. If you dont have any programs that do this (some hex editors do it) you can use File Mold.
To inject with file mold open it up, go to mode and select inject. Draw & drop the injection file and target (or use the buttons to select them) and use the appropriate offset.
The Injection file would be the rom you want and the target is retrobox .nds or .ds.gba. So use 36B08 for the .nds and 36D08 for the .ds.gba.
This has been tested on hardware if there is any problems post and i'll do my best to help you. Be sure your rom isnt corrupted, and that you use right offset and if it does runs on Reminesce (http://sourceforge.net/projects/reminesceemu).
