Hooya said:
dogmanky said:
wr0ngway said:
I'm unable to get the forwarder (16/6/09) to load the app (r576) from my USB drive. I can load the app from USB using HBC (1.0.3), and everything works fine in the app once it is running. All the paths in app config have a USB prefix. When I start the forwarder I see the loading screen, then blank, then the wii tiles as it restarts. The HD activity light does flicker during this process. Anyone have any ideas?
cIOS38_rev13a
HD (WD Passport 160G) plugged into bottom slot (doesn't work in top slot)
2 partitions:
1st = HBFS, 155GB
2nd (active) = FAT, 5GB
Are you sure your 2nd partition is FAT and not FAT32? Someone correct me, but I think 4GB is the max FAT partition.
Regardless of partition size, FAT32 is a better choice anyway. Also, make sure both partitions are active/primary or you'll probably run into issues.
hi guys, me tryng this as well,
unabl;e to set both as active via windows disk manager, as soon as one is set tio active, the other comes off active
to set the separate partitions i had to do this [seagate go 500gb]
1) set primary partition 1gb fat32
2) set primary partition remaining 476Gb no format
3) remove 1st partition
4) plug drive into usb,laoder gx and use formnat to wfbs
5) set primary partition to 1gb again and active
6) run installer, change setting to USB
using other methods the WBFS manager errors when formatting
when using WASmanager, i get an error -1 when accessing both USB and USB 2 drive
any ideas?
cant see npothing from USB in HBC1.03. do i have to change the settings in HBC to read USB?
okay ,can see apps in HBS now and WADmanager picks up USB2 wads, however, getting a -4100 error when installing
then when trying again, error -1
okay so i installed the forwarded using my SD card adn all working fine now. still, never seen the 4100 error b4