Hacking RELEASE [Trinket] [Rebug] [Others] [Modchip Software] *NEW* Fusee_Suite UF2 packages

Boomerams

Well-Known Member
Member
Joined
Dec 16, 2016
Messages
102
Trophies
0
Age
38
XP
522
Country
United States
Ok, so question...

If when I installed my trinket I did the vol+ strap with going the dual boot route... meaning if I press just power ofw boots and with vol+ and power cfw/hekate mod boots, but now I am tired of holding vol+ to boot cfw and considering I never use ofw anymore and am already banned and don't like autorcm...

What's the easiest way to configure/change my setup to just boot directly into cfw/hekate without having to hold vol+ with ever power on?

I know how to setup things to auto start the cfw once I boot into the hekate/switchboot mod whatever, just wondering what i need to do so I don't have to hold down vol+ then press power for every boot. I just want to push power and go straight into cfw from there. Thanks for any help.
 

Joshmas

Well-Known Member
Newcomer
Joined
Dec 18, 2014
Messages
94
Trophies
0
Age
34
XP
718
Country
Ok, so question...

If when I installed my trinket I did the vol+ strap with going the dual boot route... meaning if I press just power ofw boots and with vol+ and power cfw/hekate mod boots, but now I am tired of holding vol+ to boot cfw and considering I never use ofw anymore and am already banned and don't like autorcm...

What's the easiest way to configure/change my setup to just boot directly into cfw/hekate without having to hold vol+ with ever power on?

I know how to setup things to auto start the cfw once I boot into the hekate/switchboot mod whatever, just wondering what i need to do so I don't have to hold down vol+ then press power for every boot. I just want to push power and go straight into cfw from there. Thanks for any help.

Do what matty said and flash these latest 2 uf2 files to your trinket. Then boot your switch and hold the vol+ button until the red light flashes rapidly then immediately release it and let the trinket do its thing. Then power off and it should be in perma cfw boot mode.
 

Boomerams

Well-Known Member
Member
Joined
Dec 16, 2016
Messages
102
Trophies
0
Age
38
XP
522
Country
United States
Do what matty said and flash these latest 2 uf2 files to your trinket. Then boot your switch and hold the vol+ button until the red light flashes rapidly then immediately release it and let the trinket do its thing. Then power off and it should be in perma cfw boot mode.

Awesome, thanks...I read through this new thread, but for some reason that just sounded way to simple and starting thinking I was missing something. Will give it a go here in a little while.
 

Boomerams

Well-Known Member
Member
Joined
Dec 16, 2016
Messages
102
Trophies
0
Age
38
XP
522
Country
United States
Ok yeah, can not get this to work. I have flashed both the new fusee suite files, but the trinket doesn't seem to flash if/when I press vol+ and doesn't do the whole rapid flashing thing if I hold it.

The normal method does still work...where I press just power for OFW and volume+ and power for CFW. Not really sure what is going wrong.
 

Joshmas

Well-Known Member
Newcomer
Joined
Dec 18, 2014
Messages
94
Trophies
0
Age
34
XP
718
Country
Ok yeah, can not get this to work. I have flashed both the new fusee suite files, but the trinket doesn't seem to flash if/when I press vol+ and doesn't do the whole rapid flashing thing if I hold it.

The normal method does still work...where I press just power for OFW and volume+ and power for CFW. Not really sure what is going wrong.

Are you waiting til your console is full booted then holding the vol + button til it flashes rapidly red and then releasing because that works for me every time. If I doesn’t then I don’t know.
 

Boomerams

Well-Known Member
Member
Joined
Dec 16, 2016
Messages
102
Trophies
0
Age
38
XP
522
Country
United States
Are you waiting til your console is full booted then holding the vol + button til it flashes rapidly red and then releasing because that works for me every time. If I doesn’t then I don’t know.

Yep, that's what I have been doing and still no luck
 
Last edited by Boomerams,

chrissou

Member
Newcomer
Joined
Sep 9, 2009
Messages
17
Trophies
1
XP
58
Country
France
Another stupid question ! How can you see the led flashing when your Black cover is in place ? Are you using a clear case ?
Thanks again
 

switchn00b

Member
Newcomer
Joined
Dec 16, 2019
Messages
7
Trophies
0
Age
31
XP
107
Country
Canada
Hi Matty any chance you can PM me... I have lots of questions regarding trinket/cfw/atmosphere and do not want to flood any of the created threads. I would have PMed you myself, but I do not have those permissions due to my recent registration on this forum. Thanks and much appreciated
 

mattytrog

You don`t want to listen to anything I say.
OP
Member
Joined
Apr 27, 2018
Messages
3,708
Trophies
0
Age
48
XP
4,328
Country
United Kingdom
IMG_20191218_144744.jpg
Ok... An update coming...

Not mandatory to update at all.

Changes:

Proper bitmapped graphics for all icons now.
Batt gauge is a clone of Nintendo's power off battery animation with lightning strike

Batt gauge is accurate and properly filled with BMP colours...

Coming later today

--------------------- MERGED ---------------------------

Hi Matty any chance you can PM me... I have lots of questions regarding trinket/cfw/atmosphere and do not want to flood any of the created threads. I would have PMed you myself, but I do not have those permissions due to my recent registration on this forum. Thanks and much appreciated

Will do a little bit busy until this evening
 
Last edited by mattytrog,

switchn00b

Member
Newcomer
Joined
Dec 16, 2019
Messages
7
Trophies
0
Age
31
XP
107
Country
Canada
Hi, are the changes applied in this version indicate that we can update the trinket's internals without pressing the physical reset button on the trinket? Does that mean we can remove that button to make the trinket even smaller? Is that advised?
Thanks
 

mattytrog

You don`t want to listen to anything I say.
OP
Member
Joined
Apr 27, 2018
Messages
3,708
Trophies
0
Age
48
XP
4,328
Country
United Kingdom
Hi, are the changes applied in this version indicate that we can update the trinket's internals without pressing the physical reset button on the trinket? Does that mean we can remove that button to make the trinket even smaller? Is that advised?
Thanks
Using vol+ to enter uf2 mode is supported.

How it works is this...

Hold vol+ down. LED will light. Just keep holding the vol+ button and eventually the light will start a steady on-off flash. All you do then, is ensure your switch isn`t plugged in, and reboot (in rcm mode of course). Screen will stay black. Connect to PC. Done.

So, quickly...

With console switched on (mode doesnt matter), hold vol+ for probably around 15 - 20 seconds. Light will flash steadily.
Unplug from USB. Power off console.
Ensure you are autoRCM or dual boot
Power on holding vol+ if dual boot. If autoRCM, just press power
Connect to PC.
 

Site & Scene News

Popular threads in this forum

General chit-chat
Help Users
    Psionic Roshambo @ Psionic Roshambo: Micheal J Cox is running for mosquito control here lol his one sign says put Cox in your box +1