Guys... I put BLIND 2.0 on my SD card and its working! What do I do to un-brick my Wii? I won't touch anything until I get a reply. I have the BLIND app loaded and running. Please advise ASAP!
I do. It's just backed up on an external hard drive that I have to find the power cable for. I did a NAND dump many years ago. Can I load BootMii from HBC? That's the only way I think I can get to it.
nandbincheck nand.bin -all -vvv
http://www.mediafire.com/download/9778sgmybexww1o/giantpune's_Nand_Tools.zip
http://gbatemp.net/threads/ohneswanzenegger-wii-entry-pc-software.279750/
1- put a proper bootmii folder on sd:\
If you do not have one, dl hackmii and put boot.elf on sd:\
Load boot.elf via B.L.I.N.D. app loader
Remove sd card and delete sd:\bootmii\
Put sd card back in wii, install bootmii as boot2, then prepare sd card
Then reboot wii, bootmii should load
Make a new nand backup
Copy nand backup to pc, make a backup copy of the backup on pc (two backups on pc)
Open ohneswanzenegger, open the nand.bin bootmii backup
Format the nand.bin with ohneswanzenegger
Install system menu files 4.3u via ohneswanzenegger on the nand.bin
Make a proper setting.txt with proper serial number for wii with ohneswanzenegger when asked
Exit ohneswanzenegger
Now verify the new nand.bin with nandbincheckfrom shell command line consoleCode:nandbincheck nand.bin -all -vvv
Nandbincheck should pass without error
Now copy the new nand.bin back to sd:\
Load bootmii, restore the nand backup
You should have a fresh clean 4.3u install that works
Now download modmii and softmod again -you can skip boot2 bootmii install since you have it - do everything else
Fixed that. Updating past 4.1 is always a bad choice.Updating the system menuand thereby removing Priiloaderwas a bad choice.
# Video mode, possible settings:
# NTSC, PAL50, PAL60, PROGRESSIVE
VIDEO=NTSC
# Autoboot, possible settings:
# SYSMENU, HBC
AUTOBOOT=SYSMENU
BOOTDELAY=2