You should try my self host package with this. I'd be curious to see how it worksCan somebody post the edited out uhttpd file?
Nevermind got it to work! I like this better than using a phone, rasp, or PC to selfhost!
But the success rate is much lower than any of the other methods. But that's most likely based on the payloads I am using lol.
You should try my self host package with this. I'd be curious to see how it works
Is that the latest package?Damnit you posted before me. that was the next thing I did. I used your updated package and when I run the Keploit #3 I can then run HBL and Loadiine. They load 100% in that order. haven't had one fail yet. Thanks!
Is that the latest package?
Ok. I'm fixing the 2nd link right now working with the dev that built loadiine.ovh. Once the Loadiine direct launch is working then all links are working.Yep the one without xamp included.
Ok. I'm fixing the 2nd link right now working with the dev that built loadiine.ovh. Once the Loadiine direct launch is working then all links are working.
Here you are.
Inside, there is a renamed index.html to config.html
192.168.1.1/config.html -- I use when I need to get to OpenWRT admin web-console.
My default index.html is for HBL/Loadiine links (with static payloads)
Here, catch.i think i messed up the luci file in /cgi-bin and don't have the orginal
anyone that can upload that?
Here are the contents of my /etc/config/uhttpd file after removing https linesCan somebody post the edited out uhttpd file?
config uhttpd 'main'
list listen_http '0.0.0.0:80'
list listen_http '[::]:80'
option home '/www'
option rfc1918_filter '1'
option max_requests '3'
option max_connections '100'
option cert '/etc/uhttpd.crt'
option key '/etc/uhttpd.key'
option cgi_prefix '/cgi-bin'
option script_timeout '60'
option network_timeout '30'
option http_keepalive '20'
option tcp_keepalive '1'
option ubus_prefix '/ubus'
config cert 'px5g'
option days '730'
option bits '1024'
option country 'ZZ'
option state 'Somewhere'
option location 'Uknown'
option commonname 'OpenWrt'
The only negative I can say about this device after you get it up and running is that it really gets hot lol. So I just unplug it after i have loaded the exploit. I keep it unplug until I need to run the exploit and loadiine.
Thanks
- http://10.168.168.1:8080/goform/Setcardworkmode?workmode=0 - Do I need to do anything? or just click on the link and that's it? it shows status (2) when i click on it.
- Create .update directory on Zsun SMB/Windows Share (on Windows call it .update., don't ask why - it'll work) and copy SD100-openwrt.tar.gz (https://hackerspace.pl/~informatic/SD100-openwrt.tar.gz) there - How exactly do I do this? how I go into ZSUN? It said "SMB/Window Share", but what exactly is it or how to get there? I'm on window 10.
- http://10.168.168.1:8080/goform/upFirmWare - Do I need to do anything? or just click on the link and that's it?
I bought a Zsun from ebay, but when i put it in a usb, no lights are flashing... is it defect? How to connect?
Small addition to this. If you are asked for login/password when you enter \\10.168.168.1 -- use admin/admin2. In windows 10. Click the start button, and just start typing \\10.168.168.1 Then create a directory called '.update.' (no single quotes, period at the end is required), Copy firmware over to this new directory you created