Hacking Ps3Xploit - Now Install CFW from 4.82 OFW : NOR/NAND Software Flash Writer + NOR Dumper Released

[busmanl30]

Are you talking about the software flasher? Not the CFW.

Can you take a look at this it's been happening all day long

 

[ma16v3]

From what im reading my 3001B and 2501A are both not compatible?

I am 2501A and I am homebrewing AF with this. Just expect to be very patient. 3001B is not going to work, however.

The reason for the ambiguity on 25xx models is because some have a min firmware higher than 3.56, others are 3.56 and under. Have to check with minver.pup.

 

[busmanl30]

I am 2501A and I am homebrewing AF with this. Just expect to be very patient. 3001B is not going to work, however.

The reason for the ambiguity on 25xx models is because some have a min firmware higher than 3.56, others are 3.56 and under. Have to check with minver.pup.

HOW TF I HAVE THE SAME NUMBER AND IT DOESNT WORK CAN YOU HELP ME PLEASE!!!!!

 

[SG854]

Can you take a look at this it's been happening all day long

Format you usb then try this.

Make an htdocs folder within NOR_NAND_writer_release folder. And copy and paste either nor-4.82 or nand-482 html files to it, depending on your PS3 model.

Copy flsh.hex to root of usb. Plug usb to right USB port closest to your disc drive, which is probably the right USB port.

Load miniweb.exe on computer.

Go to ps3 web browser, type the host you find in miniweb.exe in the ps3 web browser address bar, and either nor.html or nand.html depending on ps3 console you have. Make sure you copy the full Host. Mine had an :8000 at the end of it.
And click on the button on the web page, wait and you ps3 will shut down. Start up ps3 and install cfw.

 

[Reaga]

Yeah for about 2 days I've only received the Data Corrupt stuff no matter what I try or how closely I follow the instructions.

 

[ma16v3]

HOW TF I HAVE THE SAME NUMBER AND IT DOESNT WORK CAN YOU HELP ME PLEASE!!!!!

I had success using the redthetrainer website. I spent four or five hours trying, hit the sack, this morning did it again for shits and giggles. Now I'm rolling with REBUG CFW.

 

[busmanl30]

Format you usb then try this.

Make an htdocs folder, within NOR_NAND_writer_release folder. And copy and paste either nor-4.82 or nand-482 html files to it, depending on your PS3 model.

Copy flsh.hex to root of usb. Plug usb to right USB port closest to your disc drive, which is probably the right USB port.

Load miniweb.exe on computer.

Go to ps3 web browser, type the host you find in miniweb.exe in the ps3 web browser address bar, and either nor.html or nand.html depending on ps3 console you have. Make sure you copy the full Host. Mine had an :8000 at the end of it.
And click on the button on the web page, wait and you ps3 will shut down. Start up ps3 and install cfw.

I'll try another USB btw did those computer steps right tho I get a 95 success rate

 

[Reaga]

Format you usb then try this.

Make an htdocs folder within NOR_NAND_writer_release folder. And copy and paste either nor-4.82 or nand-482 html files to it, depending on your PS3 model.

Copy flsh.hex to root of usb. Plug usb to right USB port closest to your disc drive, which is probably the right USB port.

Load miniweb.exe on computer.

Go to ps3 web browser, type the host you find in miniweb.exe in the ps3 web browser address bar, and either nor.html or nand.html depending on ps3 console you have. Make sure you copy the full Host. Mine had an :8000 at the end of it.
And click on the button on the web page, wait and you ps3 will shut down. Start up ps3 and install cfw.

I've been doing exactly that and still getting that Data Corrupt error.

 

[busmanl30]

I've been doing exactly that and still getting that Data Corrupt error.

Ik right it's becoming bs

 

[SG854]

I've been doing exactly that and still getting that Data Corrupt error.

Using Nor html for slim?

Are you using red the trainer website or using miniweb.exe? Have you tried both?

What ps3 model you have? Slim? fat?
Have you tried the minver.exe checker to check your lowest firmware?

 

[busmanl30]

Using Nor html?

Are you using red the trainer website or using miniweb.exe? Have you tried both?

What ps3 model you have? Slim? fat?
Have you tried the minver.exe checker to check your lowest firmware?

CECH 2501A minver 3.50 and I'm using NOR and self hosting

 

[Reaga]

Using Nor html for slim?

Are you using red the trainer website or using miniweb.exe? Have you tried both?

What ps3 model you have? Slim? fat?
Have you tried the minver.exe checker to check your lowest firmware?

PS3 Slim CECH-2501B. MinVerChk: 3.40
NOR Exploit
I've tried both site and self-hosting. In fact I'm running miniweb as I type
I've tried multiple CFW.

 

[busmanl30]

PS3 Slim CECH-2501B. MinVerChk: 3.40
NOR Exploit
I've tried both site and self-hosting. In fact I'm running miniweb as I type
I've tried multiple CFW.

Same with me

 

[SG854]

CECH 2501A minver 3.50 and I'm using NOR and self hosting

Have you tried clearing PS3 web browser cache, history, other settings, and setting a blank home page?

 

[busmanl30]

Have you tried clearing PS3 web browser cache, history, other settings, and setting a blank home page?

I do it every time

 

[SG854]

PS3 Slim CECH-2501B. MinVerChk: 3.40
NOR Exploit
I've tried both site and self-hosting. In fact I'm running miniweb as I type
I've tried multiple CFW.

When you type your ip adress to your ps3 web browser bar does a lot of text show up on your computer screen in miniweb app?

 

[Reaga]

[556] connection accepted
[556] IP: *my ps3's ip*
Connected clients: 1
[556] request path: nor-482.html
[556] 219 bytes sent (219 KB/s)
[556] 20549 bytes sent (20549 KB/s)
[556] socket closed after responded for 1 requests
Connected clients: 1

 

[SG854]

[556] connection accepted
[556] IP: *my ps3's ip*
Connected clients: 1
[556] request path: nor-482.html
[556] 219 bytes sent (219 KB/s)
[556] 20549 bytes sent (20549 KB/s)
[556] socket closed after responded for 1 requests
Connected clients: 1

Ok, so its connecting.

Are you on the latest 4.82 Official firmware? It only works on that.

 

[TheCyberQuake]

[556] connection accepted
[556] IP: *my ps3's ip*
Connected clients: 1
[556] request path: nor-482.html
[556] 219 bytes sent (219 KB/s)
[556] 20549 bytes sent (20549 KB/s)
[556] socket closed after responded for 1 requests
Connected clients: 1

You know you don't have to hide your ps3's ip. It should be connecting with its internal address, which isn't the ip anyone would use to hack you. They would need your external ip address to hack

 

[busmanl30]

You know you don't have to hide your ps3's ip. It should be connecting with its internal address, which isn't the ip anyone would use to hack you. They would need your external ip address.

Can you get discord so I can show you what I'm doing