?? - 100% Working, installation, backup, boots up to the bootmii screen on startup
?? - Partially working, usually can't start bootmii at startup
?? - doesn't work at all
?? - has issues in windows after bootmii formats it - but this seems to be very rare
This is what I have and how things work for me with all my cards
- All 3 Cards run homebrew just fine from the HBC
- KINGMAX Micro SDHC 4GB - BootMii installs from it, it can read the card and backup the NAND to but doesn't boot from it at Startup
- Apacer Micro SD 512MB - Bootmii boots from it at startup, didn't try backing up the NAND because the card is too small
- SanDisk Micro SDHC 8GB - Bootmii boots from it at startup, NAND backup was successful, Homebrew from wht I've tried seems to run well, I'll make this my new Wii card and use the 4GB KINGMAX for the DS, this used to be my DS Card.
Other user's cards:
- Kingston 2GB SD - works 100%
- Sandisk 2GB microSD - works 100%
- sandisk ultra 8gig SDHC - 100% working
- Sandisk 4GB SDHC class 2 - working 100%
- pqi 2gb microsd = can't be read on the pc after nand dump
- fake sandisk 1gb microsd = 100% working
- 2Gb Sandisk SD - 100% perfect.. Nand Backup Without problems
- Trancend 2GB - working 100%
- Buffalo 8GB SDHC Class 6 - No apps shows in HBC.. (could be a problem with HBC 1.0.2)
- Lexar 2GB MicroSD with Lexar MicroSD Adapter - Works 100%, can be read in Vista after NAND backup.
- Transcend 1GB - working 100%
- Maxell SDHC class 4 8GB - work perfect
- SanDisk 1gb Ultra II+USB(Folding card) - DOES NOT WORK TO LOAD BOOTMII (I assume this can be read by bootmii and HBC but doesn't boot bootmii much like my KINGMAX)
- SanDisk 2gb Micro - WORKS
- 2gb Polaroid - 100% working fast bootmii load!
- HP 2gb SD card - works 100%
- Kodak 2GB SD - Works for launching bootmii from boot2. (nand dump untested).
- PNY 1GB SD - Works for everything (including nand dump).
- PNY 2GB Optima SD - Fail.
- Lexar 1GB SD = Works 100%
- Lexar SDHC 8 GB - doesn't seem to run bootmii at startup
- kingston 2gb micro sd - boots bootmii, won't save NAND Backup, reset and power buttons dont work
- Veoh SDHC Class 6 - 8gb 100%
- 1gb sandisk micro sd - works perfect
- Kodak 2GB SD Card (No SDHC) - Install successfully, after install hackmii is unable to flush log and mount file system. No bootmii screen when rebooted with SD card in (FAT32).
- Kingston 4GB SDHC Class 6 - working 100%, (2 second boot time).
- 256 MB SanDisk - 100% minus nand backup due to size.
- 2 GB Dane-Elec SD card - 100%
- Lexar 1gb Micro - WORKS 100%
- Sandisk 1gb - WORKS 100%
- Transcend 8gb Class 6 SDHC -can backup fine to it, but cant boot into bootmii from it, also it locks up the wii on bootup 1 in 4 times or so
- Lexar 2GB SD Card: - cannot run bootmii as boot2 but can be used for restormii
- Kingston 2GB SD Card: - everythings works, and fast
- Panasonic 512MB SD Card - bootmii as boot2 is very slow to boot.
- Team SD 2G - Works but takes 20 secs to boot BootM
- Microcenter 2GB MicroSD
- transcend 133x 2gb - installs fine, won't load bootmii
- transcend 4gb microsd sdhc - work great instantaneous boot to bootmii
For these two it might be the SD Adapter, what kind of Adapter is it?
SanDisk UltraII Mini SD 2GB (In SD Adapter) *Not Working*
Transcend Mini SD 1GB (In SD Adapter) *Not Working*
Sandisk Ultra II - 1GB*
Sandisk - 2GB** - (if it boots to bootmii at all)
Viking - 256MB**
Viking - HighSpeed - 512MB**
Kingston Micro SD - 1GB**
* = (1-2 seconds boot time)
** = (10-12 second boot time)