Thanks, mate. Just to make sure I buy the right thing, will this dongle work?
goo.gl/4bwg1w
Looks like this must be on a Ralink, should work fine if so.
Thanks, mate. Just to make sure I buy the right thing, will this dongle work?
goo.gl/4bwg1w
Please redownload the install script, there was a typo, sorry
Ok, now I run it again, it installs dnsmasq and hostapd.
Then I shows this (don't know if it's expected or not):
After that, my 3DS detects Internet and the Nintendo Zone starts flashing, but a couple of seconds later, it returns back to "StreetPass".update-rc.d: warning: /etc/init.d/nzone missing LSB information
update-rc.d: see <http://wiki.debian.org/LSBInitScripts>
Use of uninitialized value $argv[1] in pattern match (m//) at /usr/sbin/update-rc.d line 299.
update-rc.d: error: expected NN after start
usage: update-rc.d [-n] [-f] <basename> remove
update-rc.d [-n] <basename> defaults [NN | SS KK]
update-rc.d [-n] <basename> start|stop NN runlvl [runlvl] [...] .
update-rc.d [-n] <basename> disable|enable [S|2|3|4|5]
-n: not really
-f: force
The disable|enable API is not stable and might change in the future.
starting nzone
net.ipv4.ip_forward = 1
Configuration file: /etc/wlan0_hostap.conf
Failed to update rate sets in kernel module
Using interface wlan0 with hwaddr 4c:0f:6e:fd:f4:81 and ssid 'NZ@McD1'
On my computer, every some seconds it tells me that the internet connection was closed and then opened again (I think that is when it changes the MAC address), but the 3DS doesn't detect Internet anymore.
If I try to set a new connection on the 3DS, it doesn't shows NZ@McD1 as an access point. (Only on those first seconds that it detected Internet, but then it disappears).
I'm running on a Linux Mint 16 machine (yes, I changed it from the Ubuntu 12.04. I didn't like the interface)
EDIT: also, if I run sudo /usr/local/bin/nzone stop it doesn't work. I go to that directory and it's true, there's no nzone file.
EDIT2: Ok, it's on usr/local/sbin/
sabata2@Aviarch:~/Desktop$ iwconfig
mon.wlan0 IEEE 802.11abgn Mode:Monitor Tx-Power=16 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Power Management:off
eth0 no wireless extensions.
lo no wireless extensions.
wlan0 IEEE 802.11abgn Mode:Master Tx-Power=16 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Power Management:off
sabata2@Aviarch:~/Desktop$ sudo /tmp/nzone.sh BASE256
1 - mon.wlan0
2 - wlan0
Select the number of the wireless interface to use: 2
update-rc.d: warning: /etc/init.d/nzone missing LSB information
update-rc.d: see <[URL]http://wiki.debian.org/LSBInitScripts>[/URL]
Use of uninitialized value $argv[1] in pattern match (m//) at /usr/sbin/update-rc.d line 310.
update-rc.d: error: expected NN after start
usage: update-rc.d [-n] [-f] <basename> remove
update-rc.d [-n] <basename> defaults [NN | SS KK]
update-rc.d [-n] <basename> start|stop NN runlvl [runlvl] [...] .
update-rc.d [-n] <basename> disable|enable [S|2|3|4|5]
-n: not really
-f: force
The disable|enable API is not stable and might change in the future.
starting nzone
Already running
sabata2@Aviarch:~/Desktop$
sabata2@Aviarch:~/Desktop$ sudo /etc/init.d/nzone stop
stopping nzone
network-manager stop/waiting
network-manager start/running, process 26019
Configuration file: /etc/wlan0_hostap.conf
Failed to update rate sets in kernel module
Using interface wlan0 with hwaddr 4e:53:50:4f:4f:e0 and ssid 'NZ@McD1'
iptables: No chain/target/match by that name.
iptables: Bad rule (does a matching rule exist in that chain?).
sabata2@Aviarch:~/Desktop$
Router instructions:
- open a Telnet/SSH client and execute
wget -O /tmp/nzone.sh http://nintendozone.no-ip.org/install; chmod +x /tmp/nzone.sh; /tmp/nzone.sh BASE16,GBATEMP
(alternatively you can do this in a DD-WRT WEB GUI Administration - Commands or WL500G WEB GUI Setup - System Command)
- wait for the Homepass
If your WRT router have a WPS/SES/EZ-Setup button it will toggle cron job on and off every button press, this is also helpful if cron daemon falls asleep on several DD-WRT builds.
MAC lists can be altered by crontab, as well as a MAC change time period (alternatively you can use the DD-WRT WEB GUI at Administration - Management - Cron)
You can also start/stop the AP respectively by command
/tmp/nzone start
or
/tmp/nzone stop
(/usr/local/sbin/nzone for WL500G)
the latter will also revert access point MAC and SSID to the selected in the WEB GUI settings.
Connecting to nintendozone.no-ip.org (213.141.148.11:80)
/tmp/nzone.sh: line 2: tail: not found
/tmp/nzone.sh: line 2: tar: not found
/tmp/nzone.sh: line 2: /tmp/nzone-install/install: not found
When I try this command in the DD-WRT WEB GUI I get:
Code:Connecting to nintendozone.no-ip.org (213.141.148.11:80) /tmp/nzone.sh: line 2: tail: not found /tmp/nzone.sh: line 2: tar: not found /tmp/nzone.sh: line 2: /tmp/nzone-install/install: not found
Does this mean that I don't have all the Linux commands installed? This is a fresh install of DD-WRT and I've made my Linksys WRT54G v8 into an access point (no routing).
You router have only 2MB of flash, thus is only limited to a DD-WRT micro build, which have only limited commands support.
Ah, gotcha. Is there any way for me to proceed with automating the MAC switching?
You can check the script from Before you tried anything else section in the first post, however OpenWrt version is in debug phase and may not yet work properly for your router model.i Primarily use my RaspberryPi ModelB (SpillPassPi) but i wanted to use my spare OpenWRT Router (Ubiquti AirRouter) the script @ https://gist.github.com/masterdje/7031189#file-homepass2-sh barfs @ line14 (expects a then not "fi") that Router is using OpenWRT Barrier Breaker 14.07
ahh allright till it's ready im using my RaspberryPi though im not sure if its because OR/AS is still verry new in the US, but im not getting any taggs for OmegaRuby but plenty for Pokemon X.You can check the script from Before you tried anything else section in the first post, however OpenWrt version is in debug phase and may not yet work properly for your router model.
ahh allright till it's ready im using my RaspberryPi though im not sure if its because OR/AS is still verry new in the US, but im not getting any taggs for OmegaRuby but plenty for Pokemon X.
ORAS european release is scheduled on November 28, so you have very small chance to get a streetpass for ORAS comparing with X/Y