https://github.com/Plailect/Guide/wiki

This guide includes information to get you from nearly any situation to full arm9loaderhax CFW.

If you appreciate this guide and the work I put into maintaining it, I accept donations through both Bitcoin and PayPal.

 

[Deletr753]

No. OTPs cannot be shared between devices, you must do all the steps over for another device.

So I need to do the set up for Amr9loaderhax from start in the new SD cart?

 

[Plailect]

So I need to do the set up for Amr9loaderhax from start in the new SD cart?

Whoops, misread what you said. Thought you said new console. If you've already completed the guide, you can just copy all the files to the new SD.

 

[invaderyoyo]

My N3DSXL keeps bricking. I've tried the otp process so many times. I did the hardmod so I can just restore the sysNAND, but idk what I'm doing wrong.
It always bricks when I try to restore the sysNAND from my "unbricked" 2.1 emuNAND. I always format it twice, then do the downgrade, then restore the sysNAND, but I just get a black screen no matter what, whether I insert the sd card or not.
I even tried writing the 2.1 emuNAND to the sysNAND through the hardmod and no dice.Do you guys have any advice?

 

[Ryu X]

My N3DSXL keeps bricking. I've tried the otp process so many times. I did the hardmod so I can just restore the sysNAND, but idk what I'm doing wrong.
It always bricks when I try to restore the sysNAND from my "unbricked" 2.1 emuNAND. I always format it twice, then do the downgrade, then restore the sysNAND, but I just get a black screen no matter what, whether I insert the sd card or not.
I even tried writing the 2.1 emuNAND to the sysNAND through the hardmod and no dice.Do you guys have any advice?

You are dumping your emunand after unbricking it right? You have correct region firmware?

 

[MeisterFenster]

One question: is it possible to use NTR with this? I do not need anything besides region free cartridge launching. Ideal would be: cold boot right into sysnand with patched out region check.

 

[invaderyoyo]

You are dumping your emunand after unbricking it right? You have correct region firmware?

Yeah, I unbrick it and dump it with otp helper and it bricks every time. I've been using the USA 2.1 firmware linked in the guide, but I even tried using firmware from a different place a few times. Someone suggested trying to use the 0.5 otp helper. I'm going to try that today.

 

[nickthedick]

dear sir´s

i´m back with a wierd question
i installed arm9lh bout a week ago
all was fine till today
i installed a Rom
started it
tested
and as the Buttons seemd to freez stoped it
but now i cant use Touchscreen an dpad
neither Buttons work
ist it just broken ore is there something else i can do

in hbl i can move
i can start decrypt9
is there a pssibility that i Switch something like Screen init

 

[WiiUBricker]

@Plailect:

The latest release of EmuNAND9

Part 5, the part where I set up a9lh. When I attempt to boot latest emuNAND9 to delete my emuNAND from my SD, it only gives me a black screen, no matter which entrypoint I use. Why is that?

Edit: It worked on my XXth try.

 

[Mr.ButtButt]

im having a problem
I boot normally to aureinand.
Idk if it's emunand or sysnand.
prettttyy sure it's emunand, but still..
All of my stuff from my emunand before the procedure are on there, that's why i think it's emunand.
however themehax is still enabled, so when i hold L to get into "sysnand" it gets stuck on a blackscreen and i have to force reboot.
idk how to fix this, especially, if i want to play/install more gba games in the future.
help..

 

[Supster131]

im having a problem
I boot normally to aureinand.
Idk if it's emunand or sysnand.
prettttyy sure it's emunand, but still..
All of my stuff from my emunand before the procedure are on there, that's why i think it's emunand.
however themehax is still enabled, so when i hold L to get into "sysnand" it gets stuck on a blackscreen and i have to force reboot.
idk how to fix this, especially, if i want to play/install more gba games in the future.
help..

Turn off your 3DS.
Turn on your 3DS and hold L for only 1 second.
It should boot you into sysNAND, change the theme, that'll remove menuhax.

If that fails, try using R instead.

 

[Mr.ButtButt]

Turn off your 3DS.
Turn on your 3DS and hold L for only 1 second.
It should boot you into sysNAND, change the theme, that'll remove menuhax.

If that fails, try using R instead.

but if i remove menuhax, how do i get to sysnand?

 

[Supster131]

but if i remove menuhax, how do i get to sysnand?

L.

You no longer need menuhax with A9LH.

 

[WiiUBricker]

1. Launch the arm9loaderhax installer
2. "Exploiting arm9" should be nearly instant, if you get stuck restart and try again
3. The installer will now restore your EmuNAND NAND.bin to SysNAND, then install arm9loaderhax to it

How long does this take?

 

[Mr.ButtButt]

L.

You no longer need menuhax with A9LH.

uhhhh... so why not just go to the menuhax installer in HBL and remove it like that?

 

[Mr.ButtButt]

I tried toremove mwnuhax but i literally cant even boot into sysnand
It give me a balck screen almost as if its like.. bricked..

 

[Supster131]

I tried toremove mwnuhax but i literally cant even boot into sysnand
It give me a balck screen almost as if its like.. bricked..

how did you remove menuhax?

 

[Mr.ButtButt]

how did you remove menuhax?

The menuhax installer..

--------------------- MERGED ---------------------------

how did you remove menuhax?

Well actaully i didnt remove it
I tried to use menu hax afterwards with R and it booted up
So i still have it.

 

[Supster131]

The menuhax installer..

--------------------- MERGED ---------------------------


Well actaully i didnt remove it
I tried to use menu hax afterwards with R and it booted up
So i still have it.

Try changing the theme on both of your NANDs!

 

[Mr.ButtButt]

Try changing the theme on both of your NANDs!

I changed the theme on my- what i preume is my emunand
And i cant access the- what i presume to be my sysnand, just boots up black screen and just blue light comes on

 

[Supster131]

I changed the theme on my- what i preume is my emunand
And i cant access the- what i presume to be my sysnand, just boots up black screen and just blue light comes on

Do you have both firmware files in the /rei/ folder? (Also, do you have an updatedsysnand file in the /rei/ folder? If not, it automatically boots into emuNAND.)