Flash a Hitachi Drive on a Old Xbox 360

[Mimikyu]

Hello...

I want to flash my dvd drive, now while the support for the Xbox 360 ends, and I started yesterday to get everything I need:

• JungleFlasher
• All firmwares
• My old Xbox 360
• Sata cable
• A pc with Windows 7 64 bit
• And a lot of patient...

I got the flasher to run and the pc to recognize the dvd drive through IDE mode but it didn't show up in Win7, but somehow the Flasher recognize the drive but not fully... I don't know. I deleted Windows 7 so I can try again with a clean install. But my question is: Did I do something wrong? Or was everything correct but something wasn't right anyways.

I got my knowledge from this post for the setup for the hardware:

And this video for the software:


Also! I don't want to buy or use the X360USB Tool/Device. As far as I understood, I can use my Xbox to flash while it's turned on.

Thank you in advance

 

[DinohScene]

Follow the Jungleflasher manual, it'll tell you exactly what to do.

 

[Mimikyu]

Follow the Jungleflasher manual, it'll tell you exactly what to do.

Is the manual in the software folder?

Post automatically merged: Apr 30, 2024

Follow the Jungleflasher manual, it'll tell you exactly what to do.

Edit: I added something more to my post for explaining what I did

 

[DinohScene]

Don't use videos, just follow the Jungleflasher tutorial, it comes with the Jungleflasher software yes.

 

[Mimikyu]

Don't use videos, just follow the Jungleflasher tutorial, it comes with the Jungleflasher software yes.

Alright, I'll try again later. Thank you

 

[BigOnYa]

Sounds like you need a sata PCI card, something like a vIA6421, if you don't want to use a X360USB tool.

 

[Mimikyu]

Sounds like you need a sata PCI card, something like a vIA6421.

What's that?

Post automatically merged: Apr 30, 2024

Sounds like you need a sata PCI card, something like a vIA6421, if you don't want to use a X360USB tool.

I just would use it once, that's why I don't want to use or buy those things I don't have

 

[BigOnYa]

It is a sata card that can see, read/write to x360 drives. Not all sata ports can work correctly with x360 drives, but these do.

 

[DinohScene]

What's that?

Post automatically merged: Apr 30, 2024

I just would use it once, that's why I don't want to use or buy those things I don't have

You'll have to be lucky and pray your motherboard has a supporting chipset.
Otherwise you'll have to get a compatible SATA controller.

 

[Mimikyu]

You'll have to be lucky and pray your motherboard has a supporting chipset.
Otherwise you'll have to get a compatible SATA controller.

Will the flasher tell me if it's supporting the drive? Like how will I know?

Post automatically merged: Apr 30, 2024

View attachment 434644
It is a sata card that can see, read/write to x360 drives. Not all sata ports can work correctly with x360 drives, but these do.

My boot menu recognises the drive but just Windows not. Fun fact is that the flasher also kinda recognise the drive but not as a regular drive more than a 0x0100 device... That's confusing me
That's what I would get in teh flasher:

Post automatically merged: Apr 30, 2024

But it's not connected over usb that's the fun part....

 

[Mimikyu]

I followed the manual and i still don't know why its not working. The Pc recognized it in the Boot menu but not in windows or the flasher...

 

[DinohScene]

Incompatible SATA chipset, get yourself a compatible SATA card or a flasher.

 

[Mimikyu]

Incompatible SATA chipset, get yourself a compatible SATA card or a flasher.

No I/O ports were found during Enumeration...

so my pc cant work with it?

 

[DinohScene]

Assuming Jungleflasher is installed correctly, no not unless you get the correct hardware.

 

[Mimikyu]

Assuming Jungleflasher is installed correctly, no not unless you get the correct hardware.

Just a question, is it common to have this issues with a Hitachi 47 drive? I read a lot about having issues with that drive not being recognised/flashed right

 

[BigOnYa]

https://www.ebay.com/itm/2857585734...i0JcTcL0OHDnz7jKds7pMmY2lLA=|tkp:BFBMiLWz_uZj

 

[Mimikyu]

https://www.ebay.com/itm/285758573452?itmmeta=01HWVYCV9RSYPDWHK7WTYVYANP&hash=item428889cb8c:g:19gAAOSwg-5l7tRc&itmprp=enc:AQAJAAAA0AOeAHKK6mwpkPRxRSNANsqDNmidPE8p3UgwYimZ9kaces2TTNZ5AG9Nml7euUQrrhnB0+aZHVtwQGJNHstbt2eyVC4KMqhsq3h1P/428zwhiWJ0wpbL1BFPDio/dJFonTTt2IgcYRwjHadHHvydBj6IFHEnPrLy8VbQ0YyOla52u/UaLY27fDLzNFphxQWE1SlV6lDhe+vW04cqlY7F7w0CcZbSs/Bb8H0BTy7Foxu0z7mCJFrpvc4xDRKzi0JcTcL0OHDnz7jKds7pMmY2lLA=|tkp:BFBMiLWz_uZj

Thanks

Post automatically merged: May 2, 2024

https://www.ebay.com/itm/285758573452?itmmeta=01HWVYCV9RSYPDWHK7WTYVYANP&hash=item428889cb8c:g:19gAAOSwg-5l7tRc&itmprp=enc:AQAJAAAA0AOeAHKK6mwpkPRxRSNANsqDNmidPE8p3UgwYimZ9kaces2TTNZ5AG9Nml7euUQrrhnB0+aZHVtwQGJNHstbt2eyVC4KMqhsq3h1P/428zwhiWJ0wpbL1BFPDio/dJFonTTt2IgcYRwjHadHHvydBj6IFHEnPrLy8VbQ0YyOla52u/UaLY27fDLzNFphxQWE1SlV6lDhe+vW04cqlY7F7w0CcZbSs/Bb8H0BTy7Foxu0z7mCJFrpvc4xDRKzi0JcTcL0OHDnz7jKds7pMmY2lLA=|tkp:BFBMiLWz_uZj

Shouldn't be a VT6308S working?

Post automatically merged: May 2, 2024

Thanks

Post automatically merged: May 2, 2024

Shouldn't be a VT6308S working?

Why doesn't it work then, that's very odd...

Post automatically merged: May 2, 2024

Another question, I'm sorry if I might be annoying right now. Isn't there any manual or tutorial where someone explains the process how I tried to visualise it more? Like just using the Xbox with my pc and setting up the flasher etc...? I think I followed the Flashers manual, but I want to know how the hardware needs to be connected. As far as I remember the manual tells you about the Tools like X360USB

 

[master801]

Another question, I'm sorry if I might be annoying right now. Isn't there any manual or tutorial where someone explains the process how I tried to visualise it more? Like just using the Xbox with my pc and setting up the flasher etc...? I think I followed the Flashers manual, but I want to know how the hardware needs to be connected. As far as I remember the manual tells you about the Tools like X360USB

https://consolemods.org/wiki/Xbox_360:Drive_Flashing
or
https://www.se7ensins.com/forums/th...t-slim-burner-max-payload-burn-games.1150969/

 

[Mimikyu]

https://consolemods.org/wiki/Xbox_360:Drive_Flashing
or
https://www.se7ensins.com/forums/th...t-slim-burner-max-payload-burn-games.1150969/

Thanks

Post automatically merged: May 2, 2024

Alright I just got everything to "work" again, like the flasher recognizing the drive somehow, bu tnow i get an error with some Information from the start of JIT-Debbuging. Whats that? can i just skip that? The details tell me that Jungleflasher and sytsem programms/ files try to access the "saved" storage...

Post automatically merged: May 2, 2024

Nvm, the flasher shows finally the drive

Post automatically merged: May 2, 2024

It finally worked, thank you all for helping me out

 

[Mimikyu]

Hellow again... I'm back with another problem .

Does anyone know what the Error 3-57-00 means while trying to play a burned game? My regular og games work but only my burned one not. It's a XGD2 game (Sonic Unleashed PAL).

Also if that might help my Consoles Firmware is Version 2.0.17559.0

Thanks again


Edit: I also just checked the disc with ABGX360:

Checking Game
ISO: "PIONEER DVD-RW DVRTD11RS 1.01 < 2011/03/02PIONEER> [SATA] (F"
Layerbreak: 1913760
Size: 7835516928 bytes
Files in ISO: 2965, Folders in ISO: 125
Total bytes used: 6123102562 (83.89%)
Game appears to have random padding

Checking default.xex
Original PE Filename: SWA.exe
Original PE Timestamp: 2008/10/30 14:58:10
Min Kernel Required: v2.0.6717.0
Game Name: SONIC UNLEASHED
Developer: SEGA
Publisher: SEGA
Genre: Action / Adventure
No Avatar Awards
Achievements: 50 Achievements totaling 1000 Gamerscore
XEX CRC = 957329A2
XEX Media ID: 4A75171E5D11EA5CE6639EE7-77A0CF1B

Region Code: 0x00FF0000
PAL

Checking SS
Timestamp of Authoring: 2008/11/03 00:00:00
Timestamp of Mastering: 2008/11/13 18:34:55
SS Version: 2 (trusted)
SS CRC = 1405CE2C (RawSS = 0027946D)
SS Media ID: 4A75171E5D11EA5CE6639EE7-77A0CF1B (matches game)
SS looks valid

Checking DMI
Timestamp of Authoring: 2008/11/03 00:00:00 (matches SS)
DMI CRC = 76A53F46
DMI Media ID: 4A75171E5D11EA5CE6639EE7-77A0CF1B (matches game)
DMI looks valid

Checking PFI
PFI CRC = A4CFB59C
PFI matches known data (2nd Wave)

Video partition found
Video CRC = 91410773 (V0 = 81DF6964, V1 = E47F6A94)
Video partition matches known data (2nd Wave)

Basic Stealth check passed!

Starting Verification
Looking for 1405CE2C957329A2.ini in the online verified database
Server file 1405CE2C957329A2.ini no newer than local file - not retrieving

Using 1405CE2C957329A2.ini (374 bytes)
Video CRC matches
V0 CRC matches
V1 CRC matches
PFI CRC matches
DMI CRC matches
SS CRC matches
Xex CRC matches

Checking Game CRC... (press Q to cancel)
Percent Elapsed Estimated Time Average Current Errors Total
Done Time Time Left Speed Speed Recovered Retries
100% 15:20 15:20 0:00 7.6 MB/s 6.0 MB/s

AnyDVD style corruption was not detected
Game CRC = 04F80225 (matches)

All CRCs match
Verification was successful!

Press any key to exit . . .