I'll try out b05 in more depth later, after I sleep for a while. When I tried b05 last night I had 0% success in booting my autoboot Reinand stuff with timeout=0, but maybe I was doing something wrong..I was pretty tired after all.
Edit: b05 seems to take a little while longer to boot than b02, I guess because it runs themehax on its own (? I see it run themehax twice on my N3DS, once when I turn it on, and then it launches again after some corrupted graphics that look like the Home Menu display), but it seems to boot at about the same consistency as b02 on my N3DS. Both b05 and b02 are at about a 90% boot rate for me with timeout=0. I'll probably stick with b02 for now, purely for the slightly faster booting speed (not really sure why themehax runs twice).
Last edited by daxtsu,
No matter how hard I've tried, I couldn't get rxTools to boot. It just freezes with black screen (using latest nightly build, both tried code.bin and .3dsx boots). If however I swap boot.3dsx for rxtools's boot, it loads just fine. At the other hand, launched either directly or through CTR Homebrew loader also hangs on rxtools.
Damn...
I'm using N3DSXL running 9.0.0-20E with emunand unlinked. Homemenuhax installed under emuNand.
Please, guys... Is there at least any way to get homebrew loader to run from rxtools directly? All the exploits tends to use boot.3dsx as a main executeable, which is a non-go in my situation, since it boots rsxtools itself.
Need your help...
Damn...
I'm using N3DSXL running 9.0.0-20E with emunand unlinked. Homemenuhax installed under emuNand.
Please, guys... Is there at least any way to get homebrew loader to run from rxtools directly? All the exploits tends to use boot.3dsx as a main executeable, which is a non-go in my situation, since it boots rsxtools itself.
Need your help...
Last edited by Dark Ronin,
Homemenuhax installed under emuNand ?
--------------------- MERGED ---------------------------
it should i saw some people use it.
Sorry, no. Homemenuhax installed on sysnand theme, thus booting rxtools in emunand automatically.
Can someone who got rxtools actually load up and running through CTR state their sys/emu versions and build number for used rxtools?
N3DS XL 9.0.0-20U with 9.5.0-23U emunand. I use Reinand but swapped out for a rxtools nightly to test for you. I am using the last nightly I had which was 9-28 one. It boots fine on my end.
Tip for those who are using Reinand on b05 it does work. As I mentioned in the reinand thread the top splash screen does interfere with the boot as even though the screen is black or partially black the start button will boot it. But since daxtsu posted a non-splash it works better now. Getting a very high boot rate with b05 timeout at 1.
But old 3ds still haven't gotten any luck with boot manager. I instead now use a direct boot.3dsx for rxtools as its almost flawless with it. With the b02 or b05 boot manager on old 3ds its about 60% at best for me. But I keep reading old 3ds users say it doesn't fail them so I don't know what is the issue.
Perharps I am one of these users... But, just for clarify, I don't load any CFW (because my console FW) and, therefore, I can't say nothing about those issues. I use only .3dsx HBLs and works pretty fine!... Sorry!
Last edited by fmkid,
What version do we have here? Or how many??
The problem is, people compield them theirselfs and you can change the makefile to add custom sstuff, like button cofigurations etc.
Holding the key at boot triggers home/themehax exploit but you can configure it when installing 1.3. You can configure it the other way around if you want. Or change to a different key... or... try it.
Last edited by Orkna,
I know, but this is not what I wanted ... I wanted a way to skip the hack and go the home menu.
@cpasjuste said I only need to hold a certain button to make themeha skip the exploiting procedure, but I can't find any info about it.
That's why I pruposed the feature for CtrBootManager, so we can install a themehax version which doesn't listen to any button interactions at boot, so only CtrBootManager handles all this stuff.
If you don't hold any button you will go to the original home menu.
You need to hold L to trigger it and enter the homebrew launcher OR CtrBootManager depending on how you installed it. This is the default "official" behavior.
This is homemenuhax 1.3 <- released by gbatemp member, compiled from yellows8's repo, unmodified.
The other installers that circulates here is modified by someone. I recommend to only use the unmodified version compiled from yls8's git. That way we can avoid misunderstandings.
From the source: https://github.com/yellows8/3ds_hom...ax_installer/source/themehax_installer.c#L656
It will show this on screen if you select to configure it during install.
If you want to change it later, just run the install again.
Default is booting to the ordinary 3ds home menu if no button is pressed while booting.
You need to hold L to trigger it and enter the homebrew launcher OR CtrBootManager depending on how you installed it. This is the default "official" behavior.
This is homemenuhax 1.3 <- released by gbatemp member, compiled from yellows8's repo, unmodified.
The other installers that circulates here is modified by someone. I recommend to only use the unmodified version compiled from yls8's git. That way we can avoid misunderstandings.
From the source: https://github.com/yellows8/3ds_hom...ax_installer/source/themehax_installer.c#L656
Code:
printf("Select a type by pressing a button: A = type1, B = type2, Y = type0. Or, press START to abort configuration(no file data will be written). You can also press X to delete the config file(same end result on the themehax as type0 basically).\n");
printf("Type1: Only trigger the haxx when the PAD state matches the specified value(specified button(s) must be pressed).\n");
printf("Type2: Only trigger the haxx when the PAD state doesn't match the specified value.\n");
printf("Type0: Default PAD config is used.\n");It will show this on screen if you select to configure it during install.
If you want to change it later, just run the install again.
Default is booting to the ordinary 3ds home menu if no button is pressed while booting.
Last edited by Orkna,
Similar threads
- No one is chatting at the moment.
-
-
@
Quincy:
Usually when such a big title leaks the Temp will be the first to report about it (going off of historical reports here, Pokemon SV being the latest one I can recall seeing pop up here) -
@
K3Nv2:
I still like how a freaking mp3 file hacks webos all that security defeated by text yet again -
@
BigOnYa:
They have simulators for everything nowdays, cray cray. How about a sim that shows you playing the Switch. -
-
@
K3Nv2:
https://www.verizon.com/home/intern...0a82b82a&vendorid=CJM&PID=552179&AID=11365093 can I cancel and keep the switch lol+1
-
@
BigOnYa:
I want a 120hz 4k tv but crazy how more expensive the 120hz over the 60hz are. Or even more crazy is the price of 8k's.
-
-
@
BigOnYa:
Not a big movie buff, more of a gamer tbh. And Series X is 120hz 8k ready, but yea only 120hz 4k games out right now, but thinking of in the future.
-
-
@
BigOnYa:
I only watch tv when i goto bed, it puts me to sleep, and I have a nas drive filled w my fav shows so i can watch them in order, commercial free. I usually watch Married w Children, or South Park
-
-
@
BigOnYa:
I stream from Nas to firestick, one on every tv, and use Kodi. I'm happy w it, plays everything. (I pirate/torrent shows/movies on pc, and put on nas)
-
-
-
-
@
BigOnYa:
oh you mean the 3rd party apps on Kodi, yea i know what you mean, yea there are still a few cool ones, in fact watched the new planet of the apes movie other night w wifey thru one, was good pic surprisingly, not a cam
-
-
-
@
BigOnYa:
I got my Dad a firestick for Xmas and showed him those 3rd party sites on Kodi, he loves it, all he watches anymore. He said he has got 3 letters from AT&T already about pirating, but he says f them, let them shut my internet off (He wants out of his AT&T contract anyways)
-
-
@
BigOnYa:
I just use a VPN, even give him my login and password so can use it also, and he refuses, he's funny.
-
@
BigOnYa:
I had to find and get him an old style flip phone even without text, cause thats what he wanted. No text, no internet, only phone calls. Old, old school.
-
-