Hacking Be cafeful using aluminium foil (tin foil)

[swabbo]

I used foil to access RCM on my Switch, took it out and struggled to get it back in, now my right Joy-con doesn't register as a physical connection when the foil has been removed, it says it's connected wirelessly even though it's charging.

BUY A JIG, don't do what I did

 

[isoboy]

What else is new? I got some reed switches in the mail today just in case I ever feel like installing them.

 

[Soluble]

I used foil to access RCM on my Switch, took it out and struggled to get it back in, now my right Joy-con doesn't register as a physical connection when the foil has been removed, it says it's connected wirelessly even though it's charging.

BUY A JIG, don't do what I did

Look at adjusting the pins. May be out of place.

Stop using foil.

 

[Paulsar99]

Yeah it happened to me, all I did was resync the joycons and that fixed it.

 

[memomo]

Happened to me too

 

[jellybeangreen2]

Kind of what happens when you cheap out and don’t want to spend £2 on a 3D printed JIG

 

[gameboy]

I used foil to access RCM on my Switch, took it out and struggled to get it back in, now my right Joy-con doesn't register as a physical connection when the foil has been removed, it says it's connected wirelessly even though it's charging.

BUY A JIG, don't do what I did

DUH, you should be demoted a level for even using foil

 

[swabbo]

Yeah it happened to me, all I did was resync the joycons and that fixed it.

Wow thanks, thought it fucked up my right Joy-con, that fixed it

 

[Naked_Snake]

I used foil to access RCM on my Switch, took it out and struggled to get it back in, now my right Joy-con doesn't register as a physical connection when the foil has been removed, it says it's connected wirelessly even though it's charging.

BUY A JIG, don't do what I did

I done this by chipping the 10th pin on my actual switch rail, lucky I got a spare set from eBay and fixed it myself than made a jig from an old joycon

 

[Switch-Live]

Just resync, problem solved. It happens. Understandable panic

 

[M-Gardevoir]

Nothing just resync it.

BTW solder 10 to 9 is the best way to get RCM mode.

--------------------- MERGED ---------------------------

--------------------- MERGED ---------------------------

 

[Maximilious]

This happened to me using a proper jig. As others have stated you need to resync the joycon or turn the controller off and back on for it to register correctly.

 

[jt_1258]

hey now, everyone walks their own road of risk when they choose to even try mod their system in anyway