Don't you have to set the 3d slider to on in order to finish format system setup?
Don't you have to set the 3d slider to on in order to finish format system setup?
Ehm, according to the guide i use tinyformat to format sysnand, then it reboots into the system setup for language/name/nnID etc.. But it either goes black and turn off when i click next after i choose the language or when its wanna show me the 3d image. (i might have misunderstood you, sorry if that happends to be the case)
That very uncommon to me, but have you tried selecting other language options so see if it fix?
Maybe try it without sd car inserted?
Yes you can use the eShop with CFW. Since 11.0 is the latest update, don't use the Homebrew Launcher's eShop. Yes it is possible to purchase and download things frommthe eShop with no issues. You shouldn't get banned for buying things through the eShop with CFW.
after a bunch of shut downs it finally continued, no clue what it was. thanks for the advice though!
That good old nintendo magic of Increased user stability and enhanced user experience neve fails.after a bunch of shut downs it finally continued, no clue what it was. thanks for the advice though!
Now it says emu 9.2, thanks
--------------------- MERGED ---------------------------
Ok, one more question, since I disabled "autoboot sysNAND" when I launch Luma3DS, I get Emu 9.2 in system settings. When I turn it off and turn it back on and go to system setting, it says "Ver 9.2.0" not "Sys 9.2.0." Even though it says that, its SysNAND right?
Yes.
- You must launch Luma3DS from the Homebrew Launcher every time you want to boot RedNAND
If you do not see "Emu" in front of the version number, then you are not on RedNAND. DO NOT UPDATE, FIND WHAT WENT WRONG
Last edited by Sonic Angel Knight,
Planning to switch from rxTools to A9LH, but not sure where to start in the Plailect guide!
O3DS on SysNAND 9.2 Emunand 10.6.0-31u. I believe I have Menuhax/CTR Boot set up so that it boots into Emunand without me touching anything.
Would it be better for me do this on a clean SD card with no hacks?
I'd prefer to keep my CIA games and saves (installed on the Emunand)
O3DS on SysNAND 9.2 Emunand 10.6.0-31u. I believe I have Menuhax/CTR Boot set up so that it boots into Emunand without me touching anything.
Would it be better for me do this on a clean SD card with no hacks?
I'd prefer to keep my CIA games and saves (installed on the Emunand)
https://github.com/Plailect/Guide/wiki/Part-5-(arm9loaderhax)
The instructions are incredibly unclear. I have to downgrade from 10.3 (my current OFW) to 2.1.0 to install ARM9LoaderHax?
The instructions are incredibly unclear. I have to downgrade from 10.3 (my current OFW) to 2.1.0 to install ARM9LoaderHax?
The .code file that you need to run through hans is in the exefs right? How do I unpack a decrypted exefs file?
You downgrade to 9.2 to set up custom firmware then to 2.1.0 to dump your OTP then you set up A9LH. Start at Part 2 to downgrade to 9.2 and please follow the guide religiously. Do not skip a single step.
Last edited by KunoichiZ,
After I install a game that's .cia I can delete it from the sd card right? Seems it installs elsewhere
Also is there a way to reorganize icons on the home screen?
Also is there a way to reorganize icons on the home screen?
Last edited by ,
You can delete the CIAs after installing them.
Drap and drop the icons on the home menu to reorganize them.
Delete boot.3dsx on your SD card, and replace it with this
You should boot into the homebrew launcher. Open menuhax_manager
From there, select Configure/check haxx trigger. Select type 1, hold down on the Dpad, then tap the touchscreen. Menuhax will now work on boot, only when DPad down is held
Now, do steps 1-3 here, then finish the guide starting from step 12 (In other words start from Part 3, and skip steps 4-11 there. Do everything else)
I am now on:
Section VI - Finalizing setu
Reinsert your SD card into your 3DS then press Start to reboot
Update your CFW SysNAND to the latest version using system settings (if it is not already)
Open Health and Safety (which is now FBI)
but when i boot my 3ds it stays on a black screen, any ideas?
Section VI - Finalizing setu
Reinsert your SD card into your 3DS then press Start to reboot
Update your CFW SysNAND to the latest version using system settings (if it is not already)
Open Health and Safety (which is now FBI)
but when i boot my 3ds it stays on a black screen, any ideas?
The power light goes on for a milisecond and then turns off when there is no sd inside.
I have a question about soft modding. My brother gave me his old 3ds(US) with 8.0fw and was thinking of updating it to 9.2 and installing cfw. I myself have a n3ds(EU) with latest ofw and was wondering if it is possible to use soft mod to set the n3ds back to an older fw.
Similar threads
- No one is chatting at the moment.
-
-
-
@
BigOnYa:
My wife's doctor prescribed her a ointment for neck and knee pain, that cost $30. We just read the ingredients, and active ingredient is CBD, found exact ingredients in another off brand ointment online, for only $8. Our healthcare system at its finest. -
-
@
Psionic Roshambo:
I always suggest kneepads with wheels to help with knee pain, then I get slapped -
-
-
-
-
-
-
-
@ HiradeGirl:
https://www.youtube.com/watch?v=ntjkwIXWtrc&ab_channel=Apple
I feel uncomfortable from watching this. -
-
-
-
-
-
@
Veho:
I get what they were trying to say but what the ad actually says is "we tried to cram a ton of features into the iPad but all of them got irreparably mangled+1
in the process." -
-
-
-
-
-
