http://crediar.no-ip.com seems to be down. Anyone have an alternative link for the HID-tester? I tried the one that comes with the master mod but the numbers jiggle everywhere. looking for something like this
http://crediar.no-ip.com seems to be down. Anyone have an alternative link for the HID-tester? I tried the one that comes with the master mod but the numbers jiggle everywhere. looking for something like this
There you go. http://www.mediafire.com/download/dtp0snyte3pn3pv/HIDTest.7z
Worked fine for me with my Logitech gamepad.
Nope, a bad dump can have the same size. It's just that when it was dumped, it had troubles reading some data from the disc. That's why it's generally a good idea to check the MD5 checksum against sites like GameTDB.
Hmmm, I didn't know DVD are slower than HDD, I have a question, but I was thinking, is it possible to use it on any USB Loaders (USB Loader GX, Wiiflow, etc) where it can dump original and backup (DVD-R/+R DL) game disc from USB DVD and backup and store games to USB devices (USB flash, external SD, and USB HDD)?
Last edited by knm,
Question, i tried doing a CFG for my USB Pad (Some generic one, transparent blue, handles opaque black, Turbo and Clear buttons, kind of looks like a PS2 one VID=0006 PID=0079) But Nintendont simply loads up like if no controller.ini was there.
And how can i map the Stick to the D-Pad while having analog on? My left stick broke and i need to use D-Pad and Right Stick at the same time (Metroid Prime).
And how can i map the Stick to the D-Pad while having analog on? My left stick broke and i need to use D-Pad and Right Stick at the same time (Metroid Prime).
I have a SmartJoy PS2 to USB controller
This one here
http://imgur.com/ox9Xu45
I am on 4.411
I have tried to work out a controller.ini file.
I have rolled it, and installed it on SD:\
HIDTEST picks it up I can see the the new controls all being picked up when I have loaded it back in there.
However when I then run it on Nintendont it crashes sayng "Returining to loader"
I then delete the controller.ini file and Nintendont is fine.
Please Help!
My controller.ini file:
[SMARTJOY DIGITAL PS2]
VID=0925
PID=0005
Polltype=1
DigitalLR=1
DPAD=1
A=0,04
B=0,08
X=0,04
Y=0,01
Z=0,80
L=0,10
R=0,20
S=1,F1
Left=2,00
Down=3,FF
Right=2,FF
Up=3,00
RightUp=2,10
DownRight=2,30
DownLeft=2,50
UpLeft=2,70
StickX=3
StickY=4
CStickX=5
CStickY=6
This one here
http://imgur.com/ox9Xu45
I am on 4.411
I have tried to work out a controller.ini file.
I have rolled it, and installed it on SD:\
HIDTEST picks it up I can see the the new controls all being picked up when I have loaded it back in there.
However when I then run it on Nintendont it crashes sayng "Returining to loader"
I then delete the controller.ini file and Nintendont is fine.
Please Help!
My controller.ini file:
[SMARTJOY DIGITAL PS2]
VID=0925
PID=0005
Polltype=1
DigitalLR=1
DPAD=1
A=0,04
B=0,08
X=0,04
Y=0,01
Z=0,80
L=0,10
R=0,20
S=1,F1
Left=2,00
Down=3,FF
Right=2,FF
Up=3,00
RightUp=2,10
DownRight=2,30
DownLeft=2,50
UpLeft=2,70
StickX=3
StickY=4
CStickX=5
CStickY=6
Last edited by xbmcuser,
I have a modded Xbox but sadly I don't know anything about upgrading RAM on Xbox, anyway it's a bit too late for that now, I wonder if these games can be converted to work on PC somehow as they use DirectX as a base.
Keep in mind that if he is using a Mac he can't use that app.
A Mac will report the file size as 1.46GB which is exactly the same size as 1.36GB reported by Windows. The reason they are different is how each OS calculates file sizes. Windows does 1KB = 1024 Bytes where a Mac 10.6+ uses 1KB = 1000 Bytes.
Getting the MD5 on a Mac is easier then it is on Windows as an MD5 hash calculator is built-in.
1. In Finder press Command + U to open the Utility Folder.
2. Open Terminal
3. Type "md5 " without the quotes but with the space after md5.
4. Drag ISO into Terminal Window.
5. Press Enter/Return.
6. Compare to redump.org.
7. Profit.
Last edited by ccfman2004,
then how would you change the visors on metroid prime? since visors change on the dpad and without visors change you cant finish the game either you need the visors for certain parts of the game too so yeah its kinda pointless.
Download the tool in my sig, drop your game disc image on it and see if it says "found" and quit screaming at people while asking them to help you.
EDIT: I didn't see you have a Mac. You'll have to use ccfman2004's instructions above. I'll try to make a version of GCVerify that will run on the Mac when the next Visual Studio comes out that supports Xamarin better.
Last edited by GreyWolf,
just did some more triforce cleanups, thats all.
-fixed a small bug with the mario karts, after entering the test menu the wheel init would not work anymore when leaving it
-only allow the service button getting pressed when you are in the test menu, it just freezes up the game for a second otherwise
-updated internal triforce game versions, now the mario karts have the build date as version and the unknown f-zero ax revision is now set to revision d
-fixed a small bug with the mario karts, after entering the test menu the wheel init would not work anymore when leaving it
-only allow the service button getting pressed when you are in the test menu, it just freezes up the game for a second otherwise
-updated internal triforce game versions, now the mario karts have the build date as version and the unknown f-zero ax revision is now set to revision d
if you have controller.ini or ninconfig on the root of your usb/hdd try deleting them, also nintendont version number would be good.
I have updated just 2 minutes ago, i think its 4.112
Also D-Pad up or whatever is used to switch could be mapped to L2
And im also using this for SMS, as the camera can be quite annoying and that stuff, and Smash for the Smash (How redundant :V) attacks and L2 taunts.
So will you tell me how to do so?
every dpad direction is a diferent visor. just get a working controller lol or you cant beat the game.
--------------------- MERGED ---------------------------
are you using an hdd if so does it have its own power supply?or are you using a ycable? if its an hdd with a single usb cord you need a y cable on vwii.Hi there, can you help me whit a problem?
I have IOS 58 and Homebrew Channel v1.0.8 and i get this error:
Failed to load IOS58 from NAND
on wii no on Wiiu(vwii) yes but i try deleting the controller.ini file on the root not the controller folder same for ninconfig, sometimes those files corrupt and break nintendont.Thank you so much for help me, lets see I delete de controlls folder, but the problem continues
Similar threads
-
Xdqwerty
what are you looking at? -
Psionic Roshambo
-
-
-
-
-
@
Psionic Roshambo:
I have 16GBs of DDR4 that I have been using forever lol 3200 with extremely low latency
-
-
-
-
-
-
-
-
-
-
-
-
-
-
@
Psionic Roshambo:
32GBs is the baseline for 4K video editing these days and lots of recommendations for 64GBs but for games 16,GBs is honestly plenty for a long time.
-
-
-
-
-
-
like a 250 dollar kit back when DDR4 was Intel only