I faced this issue before with fake cards. If you try to inject payload from them you get a black screen. Could be other issues but my hunch says its related to the sd card.I highy doubt the sd card is the problem.
I faced this issue before with fake cards. If you try to inject payload from them you get a black screen. Could be other issues but my hunch says its related to the sd card.I highy doubt the sd card is the problem.
If its sd card, then simply run without sdcard goes to ofw. It should not halted with blackscreen.I faced this issue before with fake cards. If you try to inject payload from them you get a black screen. Could be other issues but my hunch says its related to the sd card.
His sysnand is not in a position to boot normally. His sysnand was corrupted without backup.If its sd card, then simply run without sdcard goes to ofw. It should not halted with blackscreen.
Yeah, not the sdcard though.His sysnand is not in a position to boot normally. His sysnand was corrupted without backup.
Yeah, not the sdcard though.
It could be the sysnand corrupted. But more important is how did the sysnand corrupted.
If the sysnand corrupted because of hardware faulty from the hwfly pcb, than fix the data wont fix the problem.
Try ums loaderWith the micro SD inserted, I get black screen. Without micro SD, I have the "No SD Card" screen as third photo in my previous post
I've tried with 3 different MicroSD, but all formatted as ExFat. I will try with Fat32, but I bet won't work.
Also, cannot boot on OFW
Installers in the UK still wanting £100 to fit these in an OLED, I get that there's a lot of work involved and time consuming, not to mention probably stressful but it's still pricing me out of an install unfortunately
It has nothing to do with SD card I agree.
I bet with u if he downloads the ums loader and renames it to payload.bin and puts it on the sd card he gonna be able to load that!!
Post automatically merged:
Try ums loader
https://github.com/lulle2007200/ums-loader
Download that rename it to payload bin and I bet ur gonna get a screen
It uses IRam and if that works ur prob gonna have a issue with the ram.
That why I doomed the oled I had with that issue
It is 100 here in the US.
well hopefully an easier & cheaper to install method is discovered in the future as I intend to keep the OLED for a long time, but it would be nice to have an emunand option to keep things clean on the legit online side of things
see if u can boot lockpick with the sdcard same procedure as with the ums loader download it place the bin in the sd card and rename it to payload.bin then u can get ur keys but im gonna bet thats also not gonna work.I think, from past conversation with some people in the various threads, might be that my Boot0 partition was messed up with Picofly (I didn't have the latest firmware when I ran the first boot).
At this point, this issue (if true) might be the cause.
Yes, ums loader is booting!
What can I do with this? I am trying to find some instructions in the meantime.
Can I dump prod keys with it? If yes, I can try to regenerate clean Boot0 and Boot1.
My problem is also that I have no idea which firmware I have on the switch
Thanks in advance!
Indeed I took the lockpick from this post, renamed as payload.bin but it doesn't work.see if u can boot lockpick with the sdcard same procedure as with the ums loader download it place the bin in the sd card and rename it to payload.bin then u can get ur keys but im gonna bet thats also not gonna work.
if u have the same issue as a few of the people i know who had this issue u will get a backscreen and u can only stuff thats uses iram.
i tried rebuilding the whole nand but nothing worked for me.
i also talked to a few more people who know more about software sided and they all said the same if u can only get iram stuff runing its gona be a issue with the hardware and its not software related.
and after checking all the power ics and co i was going to atempt to change the rams , but i ordered the stencil it never came and i spent enough time on that switch without getting it runing so its just a donor board now.
Indeed I took the lockpick from this post, renamed as payload.bin but it doesn't work.
I would like to write the Boot0 and Boot1 I have generated with a donor key, is it something I can do with ums-loader? Is there a tutorial?
If doesn't work, I think I will try to check more deeply the hardware.
I doubt its picofly.I think, from past conversation with some people in the various threads, might be that my Boot0 partition was messed up with Picofly
Try to squeeze the dram or cpu little bit.If doesn't work, I think I will try to check more deeply the hardware.
Hello guys,
I`m new in here and a little confused where to ask. I want to install modchip to my Switch Lite. I have read for couple of days about this proces but it looks like it`s not a simple plug&play install. As far as I think I can handle the soldering part but I`m not sure about few things:
Can I grab aliexpres modchip, flash it with newest picofly 2.74 (just ot be sure there is correct and latest version) and I`m good to go? Is Allie RP2040 clones are fully compatible with DIY Picofly? It not gonna get bricked after flashing? (I`m 90% sure they are Picofly clones and compatible).
I can`t post any link as a new user, I would show dome exemplary modchip I found and wish to buy.
I dig that thread and found resistor values posted by "snaker" on page 8 in case of troubles with RP clones.
Can you recommend some seller/board model for NS Lite you had experience with? Some of them are suspiciously cheap.
Have a nice day
Hi!see if u can boot lockpick with the sdcard same procedure as with the ums loader download it place the bin in the sd card and rename it to payload.bin then u can get ur keys but im gonna bet thats also not gonna work.
if u have the same issue as a few of the people i know who had this issue u will get a backscreen and u can only stuff thats uses iram.
i tried rebuilding the whole nand but nothing worked for me.
i also talked to a few more people who know more about software sided and they all said the same if u can only get iram stuff runing its gona be a issue with the hardware and its not software related.
and after checking all the power ics and co i was going to atempt to change the rams , but i ordered the stencil it never came and i spent enough time on that switch without getting it runing so its just a donor board now.
So in simple words - Aliexpress modchips like one from the photo can`t be flashed with Picofly 2.73 firmware, correct?Sure u can install one of those aliexpress chips some work some don't.
If u want support in the Picofly thread then install the Original Rp2040 Tiny.
Sure they are "clones" and come with a preflashed firmware.
But they are not supported since there are no Diagrammes.
U want to use the 2.73 Firmware since 2.74 is depreciated
Yes probably the ram.Hi!
Let me understand better: if you run ums-loader and it loads, then is probably a an issue with the RAM? What behaviour do you expect while running ums-loader with a healthy RAM?
Have I ever said that?So in simple words - Aliexpress modchips like one from the photo can`t be flashed with Picofly 2.73 firmware, correct?