Search results

  1. elTwingo

    Hacking Homebrew Quick atmosphere Hosts config question

    Thank you for you anwer =) I have issues only with clock sync and nintendo account connection. On my sysnand, everything is clean. I play online regulary with smash bros mods which is theorically safe. On my emunand, I have host file + blank prod info. Maybe theses lines are the cause of my...
  2. elTwingo

    Hacking Homebrew Quick atmosphere Hosts config question

    Hi everyone, I used my oled picofly switch since 2years without issue but I have a question about my atmosphere hosts configuration. In my default.txt file I have theses lines : I wonder If i can remove them. I play online with atmosphere on sysnand (smash mods only). I also play sometimes on...
  3. elTwingo

    Hacking Hardware Picofly blink yellow one time but everything works

    Hello everyone, Recently, I modded several OLED Switch consoles, but my two most recent ones blink yellow once after blinking normally blue. The LED is not dead because I could see it flashing white when updating the latest Picofly firmware. Both Switches are OLED models, same chip, Picofly...
  4. elTwingo

    Picofly Switch working but not charging with strange logo

    Hi everyone, after long fights with hot air bq and mt chip, my switch finally stopped booting xd I really want to learn how to repair it, if its possible. I changed BQ and MT, I put back missing resistor, I also bought a kowsi device to check to voltage going into my device. After changing bq...
  5. elTwingo

    Picofly Switch working but not charging with strange logo

    Hi guys, I have news. I found a short on this capacitor near to the m92 : And I also found that a resistor was missing near to m92 too : I will change the m92 and add a new resistor. I ordered everything, wish me lucky ! My biggest fear is to blow all components around with hot air, If...
  6. elTwingo

    Picofly Switch working but not charging with strange logo

    Every values are good except theses : Now I have the 2101-0001error. I think something died when mesuring values. I saw that 2101-0001 error comes from m92 chip. At the end I will try to save this motherboard and If I fail, I will sell other parts ... This will be a hard job
  7. elTwingo

    Picofly Switch working but not charging with strange logo

    I found something else ! here is my different diode values between motherboards Working one: Not working one: How can I check this capacitor to be faulty ? 1745166583 I dont exactly understand how to mesure it but both motherboard have this black component if it's the question...
  8. elTwingo

    Picofly Switch working but not charging with strange logo

    I have a working mother board next to me and I found a diffetence between working and non working one. The capacitor(see picture) on the not working motherboard has a value of 100Ohms in resistance mod and 333Ohms on the working motherboard morehover, volt taken on this capacitor when charger is...
  9. elTwingo

    Picofly Switch working but not charging with strange logo

    Its a oled switch, I dont have there values and there components a this place. To be sure, to test it I have to be on diode mode, put black probe on ground and red one on points I want to mesure ? I plugged the AC and checked voltage at battery socket. I have random values changing everytimes...
  10. elTwingo

    Picofly Switch working but not charging with strange logo

    Switch detect that its charging, (I use a second motherboard to charge the battery). Issue comes from the motherboard but I dunno how to check resistors and capacitors
  11. elTwingo

    Picofly Switch working but not charging with strange logo

    Thank you, yes original power supply, I have other power supply that works so I dont think its this. How can I very if the issue comes from charging IC ?
  12. elTwingo

    Hacking Hardware Picofly - a HWFLY switch modchip

    Here is news ! This is what I found on my picofly OLED chip : The three 0201 resistors on top are located between the chip and the switch, and they follow the same order as the points on the left. In my case, I had: D: 47 A: 47 C: 250 As @cowboy619 suggested, and according to what I...
  13. elTwingo

    Picofly Switch working but not charging with strange logo

    I will let the switch charge for 24hour and I will try hard reset tomorrow 1744396392 What should I do or try to be able to use my switch again ? 1744407578 already tried ...
  14. elTwingo

    Picofly Switch working but not charging with strange logo

    My switch OLED picofly modded was working since this morning but battery was slowly decreasing while charging. Even with a working charger plugged in, power consumption was negative on hekate. I did all benchmark on hekate and battery seems fine. Now the battery is super low, I can't boot the...
  15. elTwingo

    Hacking Hardware Picofly - a HWFLY switch modchip

    Thank you, for sure it is 0402 resistor on my picofly, I will try to change it
  16. elTwingo

    Hacking Hardware Picofly - a HWFLY switch modchip

    Okay thank you very much I see exactly what to do then, what kind of resistor should I buy as replacement ? I see different Wattage on internet. I dont have warm air gun, can I solder it with a good iron ? I found this on internet its 0402 1/16 W, is that good ? If yes, there is the same box...
  17. elTwingo

    Hacking Hardware Picofly - a HWFLY switch modchip

    Ok so I have to solder a resistor on existant resistors on the chip itself ? Do you think you can do a little schema base on a chip pictures ? I found 0 pictures about this on internet =(
  18. elTwingo

    Hacking Hardware Picofly - a HWFLY switch modchip

    Thank you for the response, for the dat0 I can solder a resistor on the cable but for the CMD, how should I do ? I don't really know how to mesure resistor values, is it like diode values, black on GND + red on points on the chip ? I see that there is wattage with resistors, which one should I...
  19. elTwingo

    Hacking Hardware Picofly - a HWFLY switch modchip

    Hi everyone, I have an issue with an oled switch (sry for my english, i'm french and i'm doing my best). I did several v2 chip mod (5) and one oled switch successfully. I tried another oled switch and for some reason I have issues with it. I am asking some help here because I had no reason on...