Search results

  1. eddz

    Hacking ERROR CODE: 2123-0011 when trying to start game

    Got it, thanks. Is there a way that you would recommend to restore saves from one SD card to another? I had a look through the guide Blythe93 pasted and found it a bit confusing. I prefer guides that explain what is actually happening in the backend whilst you work through them. Otherwise it...
  2. eddz

    Hacking ERROR CODE: 2123-0011 when trying to start game

    Thanks for your help, mate. Appreciate it. The saved games are from when he was playing games on the CFW on the SDcard. Does that mean the saves are on the SD card too?
  3. eddz

    Hacking ERROR CODE: 2123-0011 when trying to start game

    i haven't tried that yet and am hesitant to do so because the SD card was never removed and placed in a PC for that archive bit to be set. Unless the Switch itself can mess with that archive bit (which I doubt) then this isn't the issue. Here's the rub. This is the second time this Switch has...
  4. eddz

    Hacking ERROR CODE: 2123-0011 when trying to start game

    The Switch isn't with me, it's my friends one. I asked him to test by turning off the router and booted back into Atmosphere (so no internet access as it booted) and got the below error. I've asked him to turn the router back on and boot back into CFW to see if the previous error comes back...
  5. eddz

    Hacking ERROR CODE: 2123-0011 when trying to start game

    Hi everyone, I've got an Erista Switch running Atmosphere. Have been using it for a couple of months just fine mostly playing one game. Decided to close down the game and try Mario Kart and then this screen appeared. Now, it boots to this screen every time. Nothing else was done. I didn't...
  6. eddz

    Hacking INSTINCT-NX Chip

    I followed the instructions in the YT video below with the difference being I used wire to solder only point C (dat0) and point B (rst). In the video all the other points he did with wires but I just used the ribbon flex cable the chip came with instead. 1709722894 I just read my initial...
  7. eddz

    Hacking Hardware Picofly - a HWFLY switch modchip

    The sthetix youtube video on the kamikaze method suggests using some flux in the area while drilling to 'catch' the copper dust.
  8. eddz

    Hacking Hardware Picofly - a HWFLY switch modchip

    Nice work. Where did you get the wiring diagram? I've only installed Chinese chips like the Instinct where you don't need to solder as many wires in (using the flex cables instead). I'd be interested to know what all those connections are for and where they are soldered on the board. Nevermind...
  9. eddz

    Hacking Hardware Picofly - a HWFLY switch modchip

    I just jimmy it back and forth until it fatigues the metal and breaks off on its own. Don't pull up (away from the board) at all whilst doing this. It might take a few back-and-forths. 1705054305 So envious. I've put in an order for a grinder from AliExpress to try this method out.
  10. eddz

    What to do after after a modchip is installed in my v2 switch non oled?

    I followed the instructions here and am happy with the outcome. https://github.com/sthetix/HATS
  11. eddz

    Hacking Hardware Picofly - a HWFLY switch modchip

    Interesting. I haven't noticed any issues with the ones I've done (yet). Which method would you prefer? Kamikaze?
  12. eddz

    Hacking Hardware Picofly - a HWFLY switch modchip

    Got it! Thanks. Makes sense why we need to make sure it's anchored properly. My first OLED mod I reballed the emmc but didn't feel comfortable doing it again for other OLEDs. They all worked and are still working. Future mods I'll just make sure it's anchored on all 3 sides properly and call it...
  13. eddz

    Hacking Hardware Picofly - a HWFLY switch modchip

    Interesting. According to your attached image the dat0 point (in blue) is near the top left, however, the dat0 adapter is slid in from the bottom. How does it connect to the correct point? According to the image not all the emmc pins are needed, does it mean they aren't all soldered which is why...
  14. eddz

    Hacking Hardware Picofly - a HWFLY switch modchip

    What makes it a bad dat0 adapter? Also, for bonus points, which pin of the emmc does the adapter tap into? I still dont understand how it can go in there without reballing/soldering. Does it just put into the existing soldered point?
  15. eddz

    Switch v1 missing capacitor

    You're right, it does look different. My experience mentioned above was with the OLED where they all looked the same. I can see in your pic a few that have slightly different colours. Have you measured them yet?
  16. eddz

    Switch v1 missing capacitor

    I've read on here in other threads that the caps are all the same values, so measuring the one beside it should help you. I've also read that they are used to stabilise voltages when the chip is under heavy load. I've seen first-hand the Switch keep running without a couple of those caps...
  17. eddz

    Hacking INSTINCT-NX Chip

    I've installed the Instinct V6 black (not V6s) and had it connected via USB-C to serial console. There is a help menu in there that would guide on how to use it. I remember a reset function which put it back to factory so when it was powered on the first time it would do the initial glitch...
  18. eddz

    Hacking INSTINCT-NX Chip

    No need to solder ground. 1703848938 My V6 came preloaded with the correct firmware. I would assume the same of v6s.
  19. eddz

    Switch lite

    Are your ribbon/flex cables fully in? I had a similar issue happen to me (although on the OLED, not Lite) and it turned out to be the flex cable for the screen wasn't fully seated.
  20. eddz

    Created a new emuMMC and now my games are missing, help

    That's the way I upload to the Switch too. But even at USB 3.0 speeds, it's slow (maxs out at around 30MB/s). How do you make your backups after you install them on the Switch? A dd of the entire SD card would be most reliable, but I'm open to easier ways.
General chit-chat
Help Users
  • No one is chatting at the moment.
  • Veho @ Veho:
    That's a relief to hear. Do you know what happened?
  • SylverReZ @ SylverReZ:
    @BakerMan, Any idea what happened? I hope that your brother's doing good.
  • BakerMan @ BakerMan:
    Well, from what I've heard from my parents, he had a seizure last night, perhaps an epileptic episode, fucking died, had a near death experience, my dad called the paramedics, they showed up, took him to the hospital, and he woke up covered in tubes, and started complaining.
  • BakerMan @ BakerMan:
    He couldn't eat until after his MRI, when he had a bomb pop.
  • BakerMan @ BakerMan:
    What matters now is that he's doing alright.
  • Veho @ Veho:
    But you still don't know what it was?
  • Veho @ Veho:
    Has he had seizures before?
  • The Real Jdbye @ The Real Jdbye:
    apparently stress can cause seizures, my brother had one during a test once
  • The Real Jdbye @ The Real Jdbye:
    never had one before that, and never had one since
  • Veho @ Veho:
    https://i.imgur.com/bG1pQld.mp4
     +1
  • Psionic Roshambo @ Psionic Roshambo:
    https://www.youtube.com/watch?v=_9PnFJMnYT0
  • Redleviboy123 @ Redleviboy123:
    Question about game texture chanching Do i need an own game id?
  • The Real Jdbye @ The Real Jdbye:
    @Veho for those that want to
    experience being sonic the hedgehog
  • Veho @ Veho:
    Ah, you mean
    furries.
     +1
  • The Real Jdbye @ The Real Jdbye:
    well, sonic fans are a whole separate thing from furries
  • The Real Jdbye @ The Real Jdbye:
    like bronys
  • The Real Jdbye @ The Real Jdbye:
    sonic porn is too weird even for me
  • Dumpflam @ Dumpflam:
    bruh
  • Dumpflam @ Dumpflam:
    guys how do i delete a post
  • The Real Jdbye @ The Real Jdbye:
    you don't
  • The Real Jdbye @ The Real Jdbye:
    you can report it and request deletion
  • BakerMan @ BakerMan:
    Also, no, that was his first time having a seizure, and hopefully the last
     +1
  • K3Nv2 @ K3Nv2:
    Ea play raised priced to $6 a month lol
  • BigOnYa @ BigOnYa:
    Same with uremum, she's now $2 a month
  • K3Nv2 @ K3Nv2:
    Also seizures come and and go they don't have an off switch like that it all depends
    K3Nv2 @ K3Nv2: Also seizures come and and go they don't have an off switch like that it all depends