Search results

  1. raksmey1231

    Hacking Hardware Picofly - a HWFLY switch modchip

    【闲鱼】https://m.tb.cn/h.gXdBz56?tk=1cY2WGu4I2R MF1643 「快来捡漏【switch oled，改良加大电阻，完美使用，不烧字库，】」 点击链接直接打开
  2. raksmey1231

    Hacking Hardware Picofly - a HWFLY switch modchip

    47k
  3. raksmey1231

    Hacking Hardware Picofly - a HWFLY switch modchip

    first-time kamikaze method without a microscope :wacko:
  4. raksmey1231

    Hacking Hardware Picofly - a HWFLY switch modchip

    for someone who wants to jailbreak switch oled without a DAT0 adapter or rebelling emmc, this Method is good for me I just take the pin from the SATA cable and put it under the emmc and reflow it with hot air station. I usually set the temperature to 350c 50% for 1 minute. Never had any issue...
  5. raksmey1231

    Hacking Hardware Picofly - a HWFLY switch modchip

    Hi everyone, I lost the five pads and I measured it all on a new OLED Motherboard but it did not show any value. however, when I connected the LCD cable and measured it again and it did show value. Are all the pads have no connection or sth else? thanks
  6. raksmey1231

    Hacking Hardware Picofly - a HWFLY switch modchip

    Ohh I'll try when the connector arrives. Thank you
  7. raksmey1231

    Hacking Hardware Picofly - a HWFLY switch modchip

    I have lost 5 of the pads on the motherboard
  8. raksmey1231

    Hacking Hardware Picofly - a HWFLY switch modchip

    the connector pad on the motherboard
  9. raksmey1231

    Hacking Hardware Picofly - a HWFLY switch modchip

    Hello everyone, I broke my switch oled screen connector. is there any hope to repair this? :cry:
  10. raksmey1231

    Hacking Hardware Picofly - a HWFLY switch modchip

    Single Mosfet IRFHS8342 & NP2016 work fine on OLED & V2 Switch without SDA/SCL points
  11. raksmey1231

    Hacking Hardware Picofly - a HWFLY switch modchip

    Single Mosfet IRFHS8342 & NP2016 work fine without SDA/SCL points let's say goodbye to HWfly flex cable & SDA/SCL points Thanks for sharing @abal1000x :D
  12. raksmey1231

    Hacking Hardware Picofly - a HWFLY switch modchip

    == CLK is not connected
  13. raksmey1231

    Hacking Hardware Picofly - a HWFLY switch modchip

    Sorry, I wanna make sure of the answer before I install it on my switch. Thanks, I will install it on my switch and will see how it works.
  14. raksmey1231

    Hacking Hardware Picofly - a HWFLY switch modchip

    Hi @rehius , can I use Mosfet like this? Is it correct?
  15. raksmey1231

    Hacking Hardware Picofly - a HWFLY switch modchip

    Hi everyone, can I use Mosfet like this? Is it correct?
  16. raksmey1231

    Hacking Hardware Picofly - a HWFLY switch modchip

    hi everyone, this is my first time to reballing emmc chip and then a few pin were broken. so, is there any hope to repair this?
  17. raksmey1231

    Hacking Hardware Picofly - a HWFLY switch modchip

    sd card is fat32, Atmosphere last version , dat0 value 0.745v , able to nand backup, pico fly firmware 2.73
  18. raksmey1231

    Hacking Hardware Picofly - a HWFLY switch modchip

    Does anyone ever face with this problem? when it boot into OFW, it stuck on Joycon logo. then it was boot into CFW and it loaded atmosphere logo and after it turned into black screen. Anyone know the solution, pls help. thanks
  19. raksmey1231

    Hacking Hardware Picofly - a HWFLY switch modchip

    i cannot boot into hekate when sd card not remove, i just got black screen. when sd card were remove, it showed NO SD card and then i pressed vol+ and vol- i got blue screen
  20. raksmey1231

    Hacking Hardware Picofly - a HWFLY switch modchip

    i had try it but it showed blue screen and cannot do anything
General chit-chat
Help Users
    Xdqwerty @ Xdqwerty: @Psionic Roshambo, she is non binary