Search results

  1. W

    Hardware Mig Switch on Switch 2

    wonder then if I put a shi**y sd card with 10-20mb/s read speed does it makes og switch refuse to load the game.
  2. W

    Hardware Mig Switch on Switch 2

    But that just maybe, I guess read speed could also deteriorate on original cards. Also if thats only about read speed, then that change could also be implemented on OG switch as software update to block mig switch.
  3. W

    Hardware Mig Switch on Switch 2

    It couldn't be that simple. Mig switch keeps working on original console, so I doubt it simple detection about "reply as a real card does" - which could be implemented at software level and be blocked on OG switch.
  4. W

    Hardware Mig Switch on Switch 2

    I'm curious from a technical standpoint how the Switch 2 detects a MIG switch card. If the MIG switch accurately emulates the original Switch card's protocol well enough to fool the original console, then how does the Switch 2 detect it? Does it measure resistance differences between the pins...
  5. W

    home button not working after sleep mode

    To anyone with the same problem - it's likely a corrupted emuNAND. Recreating emuNAND from scratch solves this issue completely.
  6. W

    home button not working after sleep mode

    I have exactly the same problem. Tried to update atmoshpere to newest one but it didn't changed anything. Please help
  7. W

    Hacking Hardware Picofly - a HWFLY switch modchip

    I've got turqoise 2021 switch lite with picofly + toshiba emmc and it glitches in about 1.5 seconds
  8. W

    Hacking Hardware Picofly - a HWFLY switch modchip

    Thank you, it shows 0.708 ;)
  9. W

    Hacking Hardware Picofly - a HWFLY switch modchip

    i'm attempting to do picofly installment on oled - what resistance should I get between D0 from adapter and metal shielding around emmc? My multimeter shows me 1.84Mega Ohm, is that correct reading to believe D0 adapter is correctly mounted?
  10. W

    Hacking Hardware Picofly - a HWFLY switch modchip

    I'm honestly have no idea also. I asked the same question and I've got following response: When I checked it with multimeter there is no resistance (except multimeter probes ofc) between these points so I believe that's no reason to do so (if there is however I would like to know :) ). Here's...
  11. W

    Hacking Hardware Picofly - a HWFLY switch modchip

    After flash you got red or green blink? Thats may be silly but maybe you forget about GRB/RGB led mode and what you think is green is really red (?)
  12. W

    Hacking Hardware Picofly - a HWFLY switch modchip

    you probably shortcuit some cables. Did you cut metalshield to make place for picofly? Check if it working without it. I initialy didn't cut it and I was having simmilar issue that it was working correctly when I solder it, but when I put the metal shielding back and screw it I got red blink. I...
  13. W

    Hacking Hardware Picofly - a HWFLY switch modchip

    Does rp2040 without WS logo between buttons also works? (left chip)
  14. W

    Hacking Hardware Picofly - a HWFLY switch modchip

    thank you, but why most of the people uses 2 mosfets? Whats the benefit of doing so?
  15. W

    Hacking Hardware Picofly - a HWFLY switch modchip

    Hello, I will try soldering mosfets without flex cable for picofly mod after mosfets come. But I did not know why sometimes on schema there is one mosfet and on the others 2 mosfets. Should I use two IRFHS8342TRPBF or just one is sufficient? Whats the difference when using two mosfets? Also when...
  16. W

    Hacking SWITCH NOOB PARADISE - Ask questions here

    Is there easy process for dumping nsp from sysMMC to emuMMC? I want to copy some games that I own to atmoshpere to not need to switch between the oses. I can probably do that by creating another emuMMC that will clone current sysMMC (with game that I want), and then copy nsp from that newly...
  17. W

    Hacking SWITCH NOOB PARADISE - Ask questions here

    Unfortunately no, I dont have hwfly cable at the moment, so I'll buy one and I guess then I'll try again then since I lurked at switchroot discord a little and there are mixed information about if its possible to flash hwfly-nx using hwfly-toolbox on sx chips:
  18. W

    Hacking SWITCH NOOB PARADISE - Ask questions here

    Sorry if my questions were silly. After "Update SD loader" the same error "Board was not initialized properly" is still present however (after updating I need to wait around 2 minutes to hekate to show up and diode was blinking blue). Do I need also to update firmware in hwfly toolbox? // also...
  19. W

    Hacking SWITCH NOOB PARADISE - Ask questions here

    I already came across that page, but I dont understand part "If you have hwfly-nx (...)" I believe I dont have "hwfly-nx", my modchip is original sx one: Or maybe you meant that even if my chip is SxT it should have hwfly-nx firmware on it, correct? Can I check somehow what firmware is on it...
  20. W

    Hacking SWITCH NOOB PARADISE - Ask questions here

    Hello, for the whole time I was thinking I have switch lite with hwfly chip (I bought it from second hand). However after I try to boot L4T (Atmosphere and OFW works perfectly) I've got error "Board was not initialized properly! Hang prevented. Board will reboot in 10s…". After searching a lot...