Search results

  1. A

    Hacking After failed Oled modding

    I think if the ribbon cable or the connector causing the problem if I docked it will work normally . I docked mine the led light on the dock flashes rapidly once then nothing. 1681248636 And according to dat0 I am pretty sure that I secured it very well with solder mask and it gave me the...
  2. A

    Hacking After failed Oled modding

    Thanks all for your support 1681245321 What is fpc connector
  3. A

    Hacking After failed Oled modding

    1681233733 I stuck the dat0 and soldered the anchor points to the frame then measured the value and gave me 0.771
  4. A

    Hacking After failed Oled modding

    I double checked there is no bridged connections . And used dat0 adapter without reflowing . I didn't touch namd/eemc chip .
  5. A

    Hacking After failed Oled modding

    After installing Instinct NX v6 my oled won't turn on giving me just a black screen. I removed all the wires and the mod chip it gives me a white screen with longtudinal black line moving from left to right .
  6. A

    Hardware Components used on the Switch (mostly the motherboard and main console)

    I shorted the point A / CMD transistor while installing flex cable for Instinct NX v6 . My switch oled is now not opening just a black screen while checking all communication points using my multimeter in diode mode I found that transistor is shorted . What does it name ? To buy it from a local...