Search results

  1. n0xius

    HWFly OLED v4.1 Flashing Red/Green

    sounds like bad soldering on the cpu ribbon to me. did you install it yourself or did someone else install it for you?
  2. n0xius

    Hacking Spacecraft-nx failed flash

    flashing the firmware requires a working bootloader since otherwise the dfu won't get initialized. can you check the device/vendor id inside device manager? there are 3 vendor/device ids inside the spacecraft-nx flasher and just one inside the sx flasher, if the modchip shows up as anything but...
  3. n0xius

    Hacking Spacecraft-nx failed flash

    the serial number sits at file offset 0x150 in the bootloader and is 16 bytes long. the serial number is only used for the license for sxos, so it can't be a possible problem except for sxos. a white led on the board indicates a problem glitching the tegra. can you try to a chip erase via an...
  4. n0xius

    Hardware Behaviour of Switch without EMMC

    if the switch goes straight into rcm mode(in case of a complete unbootable emmc), your pc will detect it as unknown usb device if plugged in
  5. n0xius

    Hacking Question Bad Switch v2 Flex Cable?

    do you get the red light instantly or do you see the blue blinking before it goes red?
  6. n0xius

    Hacking Question Bad Switch v2 Flex Cable?

    they should show nothing since the pins are connected to the components on the flex ribbon and not directly to the solder points
  7. n0xius

    Hacking Question Bad Switch v2 Flex Cable?

    sp1 doesnt look connected on the right side, sp2 looks fine. try to get the ribbon as low as possible and resolder sp1
  8. n0xius

    Hacking Question Bad Switch v2 Flex Cable?

    do you mind taking a picture of the soldering work? also might try to re-flash the firmware of the modchip via the usb dongle and the sx updater
  9. n0xius

    Hacking Spacecraft-nx failed flash

    it does not apply for the spacecraft-nx firmware. if you don't plan to use sxos anymore, the serial number doesn't matter. sure, ill pm you my discord.
  10. n0xius

    Hacking Question Bad Switch v2 Flex Cable?

    which switch variant do you own? model number for erista(v1) is HAC-001 and for mariko(v2) is HAC-001(-01)
  11. n0xius

    Hacking Spacecraft-nx failed flash

    the original firmware can't be flashed directly since its encrypted with a variant of TEA. you need to decrypt it first by using gw_flash.py(https://gist.github.com/SciresM/cd40c3d1b5dfafbf1fe8f7e5cf13f91e). it requires python version 2.7.11 and the usage of that python script is "python...
  12. n0xius

    Hacking Spacecraft-nx failed flash

    i just told him to get the information of the video to help him solder it to the correct points on the modchip and sthetix uploaded the bootloader files which incase you've bricked your chip will help to restore the bootloader. sounds like a wrong/broken flash of the firmware. try to reflashing...
  13. n0xius

    Hacking Spacecraft-nx failed flash

    yes, just do the same procedure as before but select the firmware binary instead of the bootloader one, change the "Start address" inside the "Program & Verify" window to "0x08003000" and make sure to check the "Skip Flash Erase" box to not erase the chip (which includes the bootloader at...
  14. n0xius

    Hacking Spacecraft-nx failed flash

    the risky part of spacecraft-nx is the bootloader replacement which fails somewhat frequently as i would say. a safe option would be to leave the bootloader as is and just replace the firmware.
  15. n0xius

    Hacking Spacecraft-nx failed flash

    go into "Target" again and select "Program & Verify", select the spacecraft-nx or sx bootloader, remove the check from "Skip Flash Erase", add it to "Reset after programming" and "Full Flash Memory Checksum" and finally press start.
  16. n0xius

    Hacking Spacecraft-nx failed flash

    since you are able to connect, there is an option inside the "Target" menu called "Option Bytes". open that, screenshot it and attach it here.
  17. n0xius

    Hacking Spacecraft-nx failed flash

    the gd-link programmer doesn't work with the st-link firmware. you have to use the STM32 ST-LINK Utility instead. if you have discord, telegram or steam, hit me up via pm since it's fast to communicate that way.
  18. n0xius

    Hacking Spacecraft-nx failed flash

    there is a tutorial out there from sthetix called "UNBRICKING THE TX LITE AND TX CORE MODCHIPS" which involves a gd-link but it can be also done via an st-link v2. you won't be able to use sx os anymore when using his sx bootloader since it contains the serial number of the chip which is used...
  19. n0xius

    Hacking What to do with SX Core for Switch Lite

    the hardware differences between the core and lite variant are the board design + the way they connect to everything inside the switch. the core one has one flex ribbon that has to get soldered to the nvidia tegra, the rest is plug & play since the emmc is removable on the normal switch...
  20. n0xius

    Tutorial SX Core Mariko - what to do next & post-install guide for newbies

    the latest release works fine with mariko units. it's not able to dump all keys under sxos though since they wipe some keys after starting their bootloader. it will dump every key just fine if you loaded it via hekate which is got loaded via spacecraft-nx or the sx gear method
General chit-chat
Help Users
  • No one is chatting at the moment.
    SylverReZ @ SylverReZ: @K3Nv2, Lol K3N1.