Search results

  1. Kinokoda

    Hacking Feedback Picofly Switch Lite Won't reboot or boot after shutting down

    I did, The technician that installed the PicoFly chip for me also installed a WaveShare microcontroller just to see if the chip was the issue. It wasn't. The issue remained. All the joints were fine and soldered well. So I am still kind of clueless. Oh and I don't know how I didn't discover...
  2. Kinokoda

    Hacking Feedback Picofly Switch Lite Won't reboot or boot after shutting down

    I have searched far and wide accross the web looking for help or anyhing but my search has been fruitless. So I decided to finally bite the bullet and come here. I have a Switch Lite that I modded some months ago, and it has a weird bug. When I power up the unit, everything is fine an I can...
  3. Kinokoda

    Hacking Hardware McFly - an RP2040 board compatible with Picofly

    Could an imperfect CPU Flex cable install cause this bug?
  4. Kinokoda

    Picofly AIO Thread

    Is there a way to log glitch/boot attempts?
  5. Kinokoda

    Hacking Hardware McFly - an RP2040 board compatible with Picofly

    Yes, nothing chnaged. System still refuses to start after the first successful boot and shutdown.
  6. Kinokoda

    Hacking Hardware McFly - an RP2040 board compatible with Picofly

    Aight, we're done. My Switch is now modded and will live a happy life as a linux tablet for networking stuff. There is one issue tho: If I boot the system up and then shut it down, it won't boot up again unless I disconnect the battery. Any ideas on how to potentially fix this? (Samsung eMMC...
  7. Kinokoda

    Hacking Hardware McFly - an RP2040 board compatible with Picofly

    Update: uninstalled the chip temporarily. I will clean up my soldering and redo the wires to try and get rid of any issues. Should I also install the scl and sda lines? oh and a small disclaimer: I am not the best at soldering, but I am stupid enough and have worked with electronics long enough...
  8. Kinokoda

    Hacking Hardware McFly - an RP2040 board compatible with Picofly

    Guys ya won't believe it... FIRST TRY! After Finishing the wiring to the chip it went to the "no sd" screen. The only thing that is iffy is that after I get to that screen the first time, if I press the power button again the neopixel led on the chip flashes green twice. I checked the RST wire...
  9. Kinokoda

    Hacking Hardware McFly - an RP2040 board compatible with Picofly

    believe me i tried. but i didnt want to become annoying
  10. Kinokoda

    Hacking Hardware McFly - an RP2040 board compatible with Picofly

    UPDATE: The guy that I was gonna pay to have the chip installed said he didn't wanna because it is untrsted hardware, I will find someone else.
  11. Kinokoda

    Hacking Hardware McFly - an RP2040 board compatible with Picofly

    yo! got two of the boards flashed. I'll have someone install them and I will report back the second that is done
  12. Kinokoda

    Hacking Hardware McFly - an RP2040 board compatible with Picofly

    Ah okay then. I'll just ground the Boot pin before plugging in the board.
  13. Kinokoda

    Hacking Hardware McFly - an RP2040 board compatible with Picofly

    I'll go to an electronic parts store tomorrow to get stuff like a regulator, a USB breakout noard, and some thin wire. Also, what is the boost pin?
  14. Kinokoda

    Hacking Hardware McFly - an RP2040 board compatible with Picofly

    No I have, I am just asking for confirmation. And I am not aware of any documentation specific to the fly2040 Yes I am aware of the AIO thread and the pfg v6.2. I just want to make sure that I have all my tools at hand
  15. Kinokoda

    Hacking Hardware McFly - an RP2040 board compatible with Picofly

    It's here! What setup should i do for flashing these and how do I do so? Do I just use the same firmware that any picofly uses?
  16. Kinokoda

    Hacking Hardware McFly - an RP2040 board compatible with Picofly

    the switch has a 3v3 volt rail/solder point, right? worst case scenario I use a regulator
  17. Kinokoda

    Hacking Hardware McFly - an RP2040 board compatible with Picofly

    Soon.
  18. Kinokoda

    Hacking Hardware McFly - an RP2040 board compatible with Picofly

    when should the pull down cpu resistor be used?
  19. Kinokoda

    Hacking Hardware McFly - an RP2040 board compatible with Picofly

    Thanks, you're a legend. And now we wait...
  20. Kinokoda

    Hacking Hardware McFly - an RP2040 board compatible with Picofly

    Wonderful! I already found the flex cables in a shop in my country, so I won't have to import those as well. I will go order 5 of the min board then to install. Oh and one more thang, is the v2 the patched unit?(Detective Columbo Stinger) Rapid Fire Edits: If I get the min boards for the lite...