Search results

  1. A

    Hacking Some questions about a already installed picofly on switch lite

    Hello I'll try best to answer your questions - I want to upgrade the sd card. I saw the guide on reddit but can I remplace the files from the "deejay87 pack" for something more "vanilla" without loosing the sys and emunand ? What are my options ? Delete everything and reinstall a more vanilla...
  2. A

    Hardware Instinct NX6

    I did use the flex cable that comes with the chip. I tried debugging the issue disconnecting each point individually and I got the correct error code. Afterwards, I tried putty but it gave me again the correct values so it all pointed to the chip. From what I found flashing red is an FPGA error
  3. A

    Hardware Instinct NX6

    Hello, I had the exact same issue but mine was booting once in a while to heakte. I had to replace the chip, I went with a V6 instead of the V6S and now it's working like a charm.
  4. A

    Instinct nx v6s flashing red

    Hello, I replaced the Instinct V6S with a normal V6 and that fixed the issue I suspect and issue with the chip itself (or maybe the firmware) but now I will keep installing the V6
  5. A

    Updated OFW and Hekate, Blue screen on boot to ofw

    Hello, CFW is still working correctly. Normally blue screen is a corrupted and. Some questions: Do you have a Nand backup? How did you update OFW and how do you boot to OFW?
  6. A

    Is this the correct chip?

    The only difference is the flex cable, the orientation of the capacitors is vertical on V1 horizontal on V2
  7. A

    Hacking [Soldering]What does this behaviour mean?

    If you have a multimeter, you can test if the points are bridged and well connected. The chances of your issues being this are pretty high
  8. A

    Homebrew RELEASE MissionControl: Use controllers from other consoles natively via Bluetooth

    Hello, How do I join the discord server, do I need an invite or be friends with Ndeadly. Sorry pretty new to disccord
  9. A

    Hacking [Soldering]What does this behaviour mean?

    Hi, Pictures are needed to understand what it going on. If the console was getting hot I suppose there was a short somewhere. Try soldering the CPU flex again, use flux and small amounts of solder
  10. A

    Hacking INSTINCT-NX Chip

    I received them last week. The new order are v6 since I never had issues with those, only need careful with the grounding issues
  11. A

    Hacking INSTINCT-NX Chip

    Last v6s I received was blinking red and not glitching once in a while. I replaced it with another one and it worked correctly. Where did you get the info that info that v6s are defective? But it makes sense, I have only installed a couple of them so I though it was bad luck
  12. A

    Instinct nx v6s flashing red

    I tried to debug it with putty. It glitches correctly every time I diagnose and the rest of the info seems ok. That said, it seems to work every time if I don't power on right after but wait a couple of minutes. I'll wait for to try another chip, I don't really think is related to Dat0 but no...
  13. A

    Instinct nx v6s flashing red

    Thank you for the replies It does glitch randomly and fails randomly. I bought some new ones to try a swap. In the meantime, I'll try the putty method. I suppose when is flashing red, I can get the error code? Any place I can find the putty commands available? All I could find was the R to reset
  14. A

    Instinct nx v6s flashing red

    Hello, So yesterday I installed an Instinct nx v6s. It was glitching but also flashing red and going to OFW. I thought I did something wrong with the installation. Removed everything and tried with another console and I have exactly the same result. Also, I flashed the latest firmware that I...
  15. A

    Comparison of modchips on the market

    Hello, it's a RP2040 based chip. I used many of those and the work perfectly so you should be ok
  16. A

    HWFLY RP2040 Lite FPC cable troubles

    Can you post a picture of the whole cable/install? I made the mistake on my first lite install because I didn't turn the flex cable correctly
  17. A

    HWFLY Soldering Help RP2040

    Hello, I am far from being a pro but had some experience from the RGH Xbox 360 time. That said, I installed successfully a couple of chips on Oled/Lite and V1/V2 and I almost broke a V2. Here are my points: - Use quality solder wire and flux, this will make the job way easier - If possible...
  18. A

    DAT0, CMD, and CLK values to check EMMC breakout PCB adapter install?

    Hello, I suppose it should be the same values as when doing the normal installation Diode Mode and between 0.6 and 0.9 volts I would like to know how did you practice, which tools etc. Would like to try this at some point
  19. A

    Homebrew RELEASE MissionControl: Use controllers from other consoles natively via Bluetooth

    Hi Ndeadly, Thanks again for all your work. For the motion/rumble support can we help you gather data?
  20. A

    Hacking couple questions, hopefully someone can answer about haxchi

    Hi, I suppose you are talking about sysnand with Sig patches If this is the case you can change the haxchi config file and set the default to the CFW fw.img For the games you can reinstall them without any problem, don't forget to backup your saves.
General chit-chat
Help Users
    RedColoredStars @ RedColoredStars: Carotenemia causes skin to appear orange-ish in color. Orange Pi. Carotenemia Pussy. Get it. lolol +1