Search results

  1. D

    0 flying wires, 0 special-shaped CPU cables, a perfect solution for OLED chips SX Lite

    I don't find that this is a better option than a 6-wire installation. Unnecessary tension will build up between the flex cable and the tiny solder point (CLK point, especially)
  2. D

    Tutorial How to flash the HWFLY Clone chips

    I tried 0.6.1 and after training, I had some trouble booting my switch. I use my switch in my house and outdoors. But it seems that if I train in my house, it doesn't boot outdoors, vice versa. When it doesn't boot light behaves like this (purple - slowly blinking -> yellow - blinking fast ->...
  3. D

    Tutorial How to flash the HWFLY Clone chips

    I tried updating 0.6.0-beta1 to 0.6.0-beta2 using included hwfly-toolbox. It refused updating because of the same version number, so I put .force_update file in the sdcard and updated firmware. But somehow update went wrong and after rebooting no light was coming from the modchip. The firmware...
  4. D

    Tutorial How to flash the HWFLY Clone chips

    I tried updating newer sdloader on non-flashable-HWFLY-installed mariko. My modchip rewrites BOOT0 after updating sdloader, so my theory was wrong :( I compared 3 BOOT0 dumps. 1) original one (HWFLY sdloader) 2) after updating sdloader using hwfly-toolbox (and powered off, booted into hekate...
  5. D

    Tutorial How to flash the HWFLY Clone chips

    you can create clean one using emmchaccgen.
  6. D

    Tutorial How to flash the HWFLY Clone chips

    Now that we can install any sdloader into emmc partition using hwfly-toolbox, isn't it possible for non-flashable modchip owners to use new sdloader without flashing firmware into modchip? Since '5V-problem' is solely caused by sdloader payload, not by MCU firmware. And the difference between...
  7. D

    Tutorial How to flash the HWFLY Clone chips

    I mean, on 0.4.0's NO SD screen (which shows 'failed to init SD card'), you can boot to ofw by pressing VOL+ and VOL- at the same time. My question is that whether you can do this without removing sd card or not.
  8. D

    Tutorial How to flash the HWFLY Clone chips

    I have a question. on mena's 0.4.0 or hwflyboi's 0.5.0, do I need to remove sd card to use 'boot to ofw' function?
  9. D

    Tutorial How to flash the HWFLY Clone chips

    You can use toolbox without flashing 0.5.0, but it has limited function.
  10. D

    Tutorial How to flash the HWFLY Clone chips

    Great! One thing I want to say is that you should disable hekate autoboot. Otherwise, if you press VOL+ and power button, it boots straight to HOS.
  11. D

    Tutorial How to flash the HWFLY Clone chips

    I have OLED-specific modchip with broken USB connection.
  12. D

    Tutorial How to flash the HWFLY Clone chips

    I have OLED-specific modchip with broken USB connection. I am considering flashing the @Mena 's 0.40 firmware. I tried flashing using internal sdloader updater (firmware.bin+ .force_update method), and using ST-Link v2. But both method gave me NO SD screen and broken version number at the right...
  13. D

    Tutorial How to flash the HWFLY Clone chips

    Oh, I see the point. Now we have all the information about the chinese clones except for FPGA thing. And I don't have to use a suspicious chinese firmware. Thank you.
  14. D

    Tutorial How to flash the HWFLY Clone chips

    Which version is this firmware based on? I guess it's modified from KazushiMe's mod, right?
  15. D

    Tutorial How to flash the HWFLY Clone chips

    Yes.
  16. D

    Tutorial How to flash the HWFLY Clone chips

    I guess you didn't connect 3.3v line to the lifted pin 44 (set BOOT0 high)
  17. D

    Tutorial HWFLY chips will brick your OLED. Here is how to avoid it

    As long as it has spacecraft-nx v0.2, you don't have to worry about black screen.
  18. D

    Hacking How To Merge Split Nand

    In Windows command prompt : copy /b "A.bin" + "B.bin" + "C.bin" "output.bin" voila
  19. D

    Hacking Team-Xecuter Presents SX OS v2.3 BETA

    I have sysnand 6.2 and emunand 6.1 with 8 burnt fuses (6.1 expects 7 burnt fuses). I can use 6.2 sysnand without problem. But when I boot emunand 6.1, getting into sleep mode freezes the device. To avoid burning fuse, I tried to install autorcm right after sysnand update, but SX OS and hekate...
  20. D

    Hacking TX Announces revolutionary update to SX OS v2.0 with 'EmuNAND' and more

    The Messenger fails to start on OS 2.0. Seems like layered-fs update is the culprit like other cfws.
General chit-chat
Help Users
    Xdqwerty @ Xdqwerty: @K3Nv2, 4th what?