Search results

  1. I

    Edm41 dies at dashboard weirdest issue I've seen

    Hey I have a ps5 edm 041 worth a really weird issue. It boots up fine but within a minute of being in the dashboard it will just die. Power supply is constantly providing 12v even after it dies. No shorts on the board at all. When it came to me it had no liquid metal on it. I thought that was...
  2. I

    Edm031 no shorts no power,no draw

    I couldn't get this ps5 to respond to UART but I'll do it again just to be sure. This is my current power draw. Avoiding the to graph it's all over the place. I'm not sure I really understand tbh 1775236726 Soi was about to connect it to UART again and thought I'd just test it to see if it...
  3. I

    Edm031 no shorts no power,no draw

    Any ideas?
  4. I

    Edm031 no shorts no power,no draw

    Took a real close look and it doesn't really seem like there's any real damage to the apu from what I'm seeing. 1775076946 Also previously in another thread you mentioned some documents that show the power sequencev and which ics are activated in order. Was that the service manual or the...
  5. I

    Edm031 no shorts no power,no draw

    It had split apart, the CPU place from the heatsink had come off. Initially when I first got it I tested it, it powered on for a few seconds fan spun like crazy and switched off. Then it never did that again
  6. I

    Edm031 no shorts no power,no draw

    I respected the chip and now I'm getting very high power draw 300ma tob400ma then down to 95ma I've done some searching and pin 13 isn't shorted diode value is 510. This indicates a bad SB right?
  7. I

    Edm031 no shorts no power,no draw

    Hey everyone I have this ps5 that initialy came in for switching on fan going crazy and switching off. Turns out the heatsink had fallen apart. Dealt with that and went to test and then no power. There's no shorts on the board that I can find. When connected to PSU there's no current draw...
  8. I

    Series x booster ic short and power issue

    Anyone got any ideas please? 1770411157 So I bypassed the booster and the short is gone but now the ribbon that connects the 2 boards is burning hot.... And it's not switching on at all now
  9. I

    Series x booster ic short and power issue

    I have an Xbox series x that came in for overheating and hdmi issue. The hdmi pins were visibly broken and touching. Before doing anything I powered it on and it did stay on. Replaced port and thermal compound and went to test. No image and now it stays on for a few seconds and switches off...
  10. I

    Edm 033 ce108255 error with every game

    I compared diode readings from here although it's not the same board. Some of the values on the right side of the controller, the test points, are very high. But there's no shorts at all. 1768842408
  11. I

    Edm 033 ce108255 error with every game

    I've got an 033 ps5 with ce108255-1 error with every game. UART shows no errors. I can't see any shorts on the board either. Boots up fine too, I'm assuming SSD controller?
  12. I

    no post msi z370 a pro with i57600k cpu light constant

    oh my GOD!! what the hellll i didnt even think to check this!!!! thank you so much
  13. I

    no post msi z370 a pro with i57600k cpu light constant

    right ok i understand what you're saying. thank you i really do appreciate your help. for context the previous cpu died in another mobo and this was his second board. edit just spoke to him and he used the same cpu in in the previous board as well as this one. i think the issue may be a fried...
  14. I

    no post msi z370 a pro with i57600k cpu light constant

    the board powers on but doesn't post. i don't know what else it could be. considering it powers on im assuming the power rails are present no? i normally don't do board repair on desktop boards so i'm definitely a little lost on this one. although i suppose its the same as laptop boards...
  15. I

    no post msi z370 a pro with i57600k cpu light constant

    hey thanks for replying. the cpu light on the biard is on not the gpu light. it does not post at all. will not boot at all i have the tools to desolder the bios and write to it. can i do it with the chip clip while its on the board instead of having to remove it? from what im looking at the...
  16. I

    no post msi z370 a pro with i57600k cpu light constant

    no ideas anyone??? aslso mobo does not complain when no memory is installed
  17. I

    no post msi z370 a pro with i57600k cpu light constant

    hey everyone ive got a real headache here! this board will power on but i cant get it to post. it will power on and all the fans spin but no post. ive done all the standard troubleshooting, stripped everything and just kept cpu and memory, different sticks of memory and slots. cleared cmos and...
  18. I

    Ps5 EDM 010 no power draw no shorts

    Thanks so much for all your advice and help. I Managed to get it all done today and it's all working! After putting the new sb on I tested first with my psu and it went through it's sequence but ended at 0v whereas it normally ends and stays at 0007v. This happened with the first one I...
  19. I

    Ps5 EDM 010 no power draw no shorts

    I was just practicing on a PS4 board with this bga machine. Went so so well! Definitely need to adjust the temps a little bit overall went really well. After pre heating I took out to my desk where I have that heating silicon mat for displays to keep it warm. Used no nozzle with 400c with...
  20. I

    Ps5 EDM 010 no power draw no shorts

    Ok I guess it's time to replace the sb! I've only ever done it successfully once on a PS4. Never had to do it again since. Think I'll practice on a donor board a few times first 1763602035 Thank you so much for the help and the info. Sincerely appreciated. I have a bga machine that I...