Recent content by ypeeLs

  1. Y

    Hacking Hardware New OLED FPC with point for kamikaze mod

    https://www.aliexpress.us/item/3256810104347187.html?spm=a2g0o.productlist.0.0.b5144ff5X1onC2&mp=1&pdp_npi=6%40dis%21USD%21USD%202.03%21USD%202.03%21%21USD%202.03%21%21%21%402101df0e17671625878737560e5aea%2112000051835388048%21ct%21US%216040035424%21%2110%210%21&gatewayAdapt=glo2usa
  2. Y

    Tips if you are going to attempt an OLED modchip install

    do you know his reddit username?
  3. Y

    Hacking Hardware McFly - an RP2040 board compatible with Picofly

    have you tried pressing the power button for 20 seconds?
  4. Y

    Hacking Hardware Picofly - a HWFLY switch modchip

    it is present on the full board
  5. Y

    Hacking Hardware Picofly - a HWFLY switch modchip

    Won't work, you need a flash chip to store the firmware at least
  6. Y

    Hacking Hardware McFly - an RP2040 board compatible with Picofly

    isnt the point of the pull down resistor for the off chance that the CPU pin disconnects from the board?
  7. Y

    Hacking Hardware McFly - an RP2040 board compatible with Picofly

    BOM finally arrived.. now to find a sacrificial Switch
  8. Y

    Picofly AIO Thread

    I don't even put kapton tape over my tiny installs there's so much room, you would have to punch the back of the console to make the shield contact the chip
  9. Y

    Hacking Hardware Picofly - a HWFLY switch modchip

    1. Sewing needles 2. Hakko CHP170 3. Aixun T3A with 1.5mm chisel tip 4. Amtech NC-559-V3-TF 5. Not sure what you mean, but I have slipped with the needles while removing the shield and stabbed the motherboard 6. Iron should never touch the board long enough to transfer heat to other components...
  10. Y

    Picofly AIO Thread

    What resistor value should be soldered to G and S? I just got a bunch of 4.7k to fix a purple screen, would that work?
  11. Y

    Hacking Hardware Picofly - a HWFLY switch modchip

    There is only a diode range for 3.3v, RST, CLK, CMD, DAT0
  12. Y

    Hacking Hardware Picofly - a HWFLY switch modchip

    Your boot0 is corrupt, I fixed mine with
  13. Y

    Picofly AIO Thread

    SP1 and SP2 get connected to the shield, I see what you're trying to do but you should'nt name them SP1 and SP2 otherwise people might try to ground them
  14. Y

    Picofly AIO Thread

    isnt SP1 and SP2 ground?
  15. Y

    Absolutley LOST! OLED Switch w/ v5 hwfly Boots Everything except OFW

    Figured it out, HWFly is purposely destroying BOOT0, I managed to restore it and I was able to reboot > OFW but on the next cold boot I got a flashing purple light for a long time followed by a blinking yellow light then green. annnd BOOT0 is damaged again and i cant reboot > OFW anymore
See more