Recent content by Vigintiduo

  1. Vigintiduo

    Hacking Hardware Picofly - a HWFLY switch modchip

    I've got this Switch v2 with a rp2040 picofly and a busted emmc. I've seen other cases like this before but this one is weird. With the original eMMC I can get to hekate without any problem but it cannot initialize emmc. With the new eMMC module it gets an error even before that with the rp2040...
  2. Vigintiduo

    Hacking Hardware OLED Picofly: sleep mode battery draining + Joycon jiggle

    Hi, have you checked for shorts beneath the SoC? In Lakka, the Switch can wake itself up if the power button gpio pin is shorted. The joycon issue might be related
  3. Vigintiduo

    Hacking Hardware Picofly - a HWFLY switch modchip

    In the end, it was the inductor. By replacing it with a component from a donor, I saved the Switch. Dat0 was fine
  4. Vigintiduo

    Hardware Components used on the Switch (mostly the motherboard and main console)

    Hi guys, I'm missing a 1uH 0805 inductor on an oled Switch. I've got a donor v1 Switch, can I find the same component in there?
  5. Vigintiduo

    Hacking Hardware Picofly - a HWFLY switch modchip

    Ok, to be a bit more precise, the Switch does power on but it doesn't progress further through its stages. That's why I thought it to be clk (for some reason I believed that dat0 would display a purple screen). Every trace looks fine, but who knows? I'd like to test continuity from the back of...
  6. Vigintiduo

    Hacking Hardware Picofly - a HWFLY switch modchip

    Actually the trace on the cpu side looks just fine. It's just that, reading from older posts, I kinda understood that it's possible to break the very inner part of the via that goes to deeper layers. Or maybe I just completely misunderstood and the problem lies elsewhere?
  7. Vigintiduo

    Hacking Hardware Picofly - a HWFLY switch modchip

    Hi guys. I've got a bad wiring/dead cpu error on this oled and after removing every mod component, I just get a black screen. Reading from past messages, it appears that scratching the clk via might have broken it. I don't have a green adapter to source clk from, so I was thinking: is there a...
  8. Vigintiduo

    Hacking Hardware Picofly - a HWFLY switch modchip

    Yep, it's the same as mine
  9. Vigintiduo

    Hacking Hardware Picofly - a HWFLY switch modchip

    As long as it doesn't cause any issue afterwards, I'm fine with that!
  10. Vigintiduo

    Hacking Hardware Picofly - a HWFLY switch modchip

    Did that too and it was fine as well. Anyway, the problem went away after a thorough cleaning of the pcb. BUT there's a minor other thing now. Whenever I load something from hekate, be it Sysnand of Emunand, there's a brief vertical green glitch on the screen. Everything else works fine. Should...
  11. Vigintiduo

    Hacking Hardware Picofly - a HWFLY switch modchip

    Wifi is ok That's the first thing I did. Values look fine. Picture attached
  12. Vigintiduo

    Hacking Hardware Picofly - a HWFLY switch modchip

    Done my new OLED Switch with kamikaze method just now. Everything seems to be working fine but the console feels a bit slow to come out from sleep mode (and also when showing the Switch logo). Can this be related to picofly?
  13. Vigintiduo

    Hardware Switch v1 having problems waking from sleep mode lately

    Done my new OLED Switch with kamikaze method just now. Everything seems to be working fine but the console feels a bit slow to come out from sleep mode (and also when showing the Switch logo). Can this be related to picofly? EDIT: Sorry, wrong thread
  14. Vigintiduo

    Hacking Hardware Picofly - a HWFLY switch modchip

    Hi, if I'm working on a Switch Lite and I want to place the rp2040 on top of the emmc shield, are there any optimal and closer 3.3v and gnd points that I can source from?
  15. Vigintiduo

    Hacking Hardware Picofly - a HWFLY switch modchip

    Didn't know about that! I'm gonna test it soon
See more