Recent content by ttaeung0217000

  1. T

    ROM Hack [Release] AGB_FIRM Signature Patcher + GBA ROM Converter

    Windows detected virus what should i do?
  2. T

    Hardware Hacking [question] old 3DS bricked(bootrom error)

    i removed resistor to test data line and soldered resistor i don't know what is wrong pcb crack or cold soldering
  3. T

    Hardware Hacking [question] old 3DS bricked(bootrom error)

    i removed quad resistor(dat0,1,2,3) but still DAT0 connected at GND maybe 1. emmc BGA cold soldering 2. PCB crack 3. soldered itself by hot(?) solution 1. remove bonding and reballing emmc chip (hardest) 2. connect another emmc chip (simple) 3. capture X ray(???) i will try 2(new emmc)
  4. T

    Hardware Hacking [question] old 3DS bricked(bootrom error)

    i found something wrong DAT1 connected at GND i'm finding wrong point
  5. T

    Hardware Hacking [question] old 3DS bricked(bootrom error)

    i wanted to solve this error now i'm seaching problems pcb crack or cold soldering etc..
  6. T

    Hardware Hacking [question] old 3DS bricked(bootrom error)

    i soldered again and errcode changed likes this and sd card can't detect 3ds emmc BOOTROM 8046 ERRCODE: 00F800EF FFFFFFFF FFFFFFFF 00000024 00000000
  7. T

    Hardware Hacking [question] old 3DS bricked(bootrom error)

    i just wanted to test new sd card reader(......) i'm finding sd card readers to read emmc
  8. T

    Hardware Hacking [question] old 3DS bricked(bootrom error)

    oops i upload another picture by mistake this
  9. T

    Hardware Hacking [question] old 3DS bricked(bootrom error)

    yes. before it worked very well
  10. T

    Hardware Hacking [question] old 3DS bricked(bootrom error)

    this is motherboard wait errcode changed...? i soldered those resistors
  11. T

    Hardware Hacking [question] old 3DS bricked(bootrom error)

    but nand read write works well with win32disk imager i'm trying soldring with flux
  12. T

    Hardware Hacking [question] old 3DS bricked(bootrom error)

    BOOTROM 8046 ERRCODE: 00F800EF FFFFFFFF FFFFFFFF 00000024 00000000 a... um... i soldered nand pinout tap DAT0 CMD CLK (GND) and i readed nand and turned on and this error displayed so i removed wires and soldering but it doesn't work! and i writed...
See more