Recent content by TechCentreUK

  1. TechCentreUK

    Hacking Hardware Picofly - a HWFLY switch modchip

    Agreed forget I said anything lol 1680388393 I retract my statement I’m afraid after advise from others on here
  2. TechCentreUK

    Hacking Hardware Picofly - a HWFLY switch modchip

    They can’t do anything if the installer isn’t providing software though right?
  3. TechCentreUK

    Hacking Hardware Picofly - a HWFLY switch modchip

    Compared to my quick861 and 2UUL tweezers your setup is huge lol 1680385865 Yeah I have a couple switchs in for repair, if not done by time I’m back working next week then I will do one for v1/v2 and lite 1680386275 Let me know what you need I have lots of boards, cpus with Emmc, donor boards...
  4. TechCentreUK

    Hacking Hardware Picofly - a HWFLY switch modchip

    My image looks like it’s soldered there but it isn’t. I have come off the boards connector for Emmc pins so I can remove and upgrade the Emmc size later. This was just a test run to see what’s the best route to take when doing this with wire size, locations and placement etc. I’m in bed now but...
  5. TechCentreUK

    Hacking Hardware Picofly - a HWFLY switch modchip

    Erista
  6. TechCentreUK

    Hacking Hardware Picofly - a HWFLY switch modchip

    Yeah I did that and it wasn’t this. The issue was the sd card reader wasnt plugged in correctly lol
  7. TechCentreUK

    Hacking Hardware Picofly - a HWFLY switch modchip

    Just to confirm it boots 1 in every 20 odd times on the switch lite so I have left those both aside. Now v2 have it working instantly every single time but I get the hekate failed to open payload.bin What is the correct sd card setup for this as I have tried everything including using a sd card...
  8. TechCentreUK

    Hacking Hardware Picofly - a HWFLY switch modchip

    1679678552 Wire thickness was my thinking but I always use the enamelled jumper wire for trinket install with no issues.
  9. TechCentreUK

    Hacking Hardware Picofly - a HWFLY switch modchip

  10. TechCentreUK

    Hacking Hardware Picofly - a HWFLY switch modchip

    Can you show me what you did please? 1679677690 This is how I currently have it. Exactly as the pic
  11. TechCentreUK

    Hacking Hardware Picofly - a HWFLY switch modchip

    Done this and same outcome, added resistor to pin 15 also (because somewhere in this thread I saw this could be needed if bad results, and I’m getting the same result.
  12. TechCentreUK

    Hacking Hardware Picofly - a HWFLY switch modchip

    deleted
  13. TechCentreUK

    Hacking Hardware Picofly - a HWFLY switch modchip

    Hello guys, Nintendo switch lite, I’m getting blue led then purple and then ofw boot like normal and no led. but c0, CMD and CLK are all 100% soldered correctly using 47ohm resistors.
  14. TechCentreUK

    Picofly AIO Thread

    Hi guys switch lite install here I’m getting blue led then purple/pink led and a normal ofw boot. Confirmed soldering of cmd and clk are correct I’m using 47ohm resistors on cmd, clk and d0.
See more