Recent content by switcherler

  1. S

    does any one know the values of the emi filters and the green component on the hmdi port?

    does any one know the values of the emi filters and the green component on the hmdi port? I need to get these components but i do not know values or the names can anyone help out please and thank you
  2. S

    nintendo Switch lite mod install no display, first boot at 15v .450 mah and then no boot and stuck on 15v .189

    Switch lite used to turn on before the install and after the install it turned on 2 times before inserting the sd card. Sd card not the problem check it in other switch to se if it works. When mod chip inserted it flashes normal, then no display. When no mod chip it still shows no...
  3. S

    Ps5 hdmi bottom component and top capacitor values?

    What is the bottom diode value, would this one be correct? https://a.aliexpress.com/_mq58kO7 For the capacitor near the hdmi port on the top it is a 0402 100nf capacitor but for what voltage there are two options 16V or 25V, which one would work?
  4. S

    Feedback Review Tutorial My 2026 Setup (Guide with links and Capabilities)

    anyone get the ppsp emulator working? I tried it but no success here.
  5. S

    Switch oled (demo unit), can it be used to play online like a non-demo unit would be without getting banned?

    I have a switch oled demo unit, modded and fully working on OFW. Can it be used to play online like a regular one without it getting banned by nintendo?
  6. S

    Nintendo Switch OLED, "software could not be started".

    you are a life saver , i have tried to google to see if i can find something but i guess i failed. THENK YOU VERY MUCH
  7. S

    Nintendo Switch OLED, "software could not be started".

    it doesnt boot into the main system , it goes boot 1 and boot 2 (nintendo logo and switch logo) then it says software cannot be started. click on the link for the video to see what i mean.
  8. S

    Nintendo Switch OLED, "software could not be started".

    I bought a oled switch with the "software could not be started " issue, i tried to reboot in maintenance mode, and also NAND fix level 1 and 2 (from sthehix), and still the same issue. I saw older post saying this could be a kiosk switch. I mod chipped the oled, and everything is working fine...
  9. S

    Nintendo switch OLED, wont turn on after trace destroyed

    problem solved, all I had to do was repair the trace DAT2 which is connected to GPU and EMMC, without communication no booting. Now everything boots and works fine, mod chip installed. thanks every one for the tips and help 1731482622 thank you for the help everything is fixed, I appreciate the...
  10. S

    Nintendo switch OLED, wont turn on after trace destroyed

    thanks you, yes from the diagrams i have recieved from people, Yea the Dat2 communicates to both the GPU and EMMC and is the reason why it wont turn on or show booting voltage on while charged. I am waiting for the wire to solder and connect the line. 1730756934 thank you very much, forgot to...
  11. S

    Nintendo switch OLED, wont turn on after trace destroyed

    I recently tried kamikazee and i think i pulled out the wrong trace and destroyed it. After the trace was destroyed , the nintendo switch does not turn on. I plugged it into a usb charging station that tells you the amps and charging, it reads .045 mah when charging, but it does not do the .045...
  12. S

    NINTENDO SWITCH PURPLE SCREEN AFTER SWITCHING DEFECTIVE INSTINCT NX V6 FOR PICOFLY HW

    I have, and the only thing that works is the faulty chip, wit and without the instinct nx 6v modchip it does work on OFW, if the instict NX wants to work it will load hekate if not straight to OFW. with the other picofly chip, there is 100% always purple screen and failed to innit emmcu. should...
  13. S

    NINTENDO SWITCH PURPLE SCREEN AFTER SWITCHING DEFECTIVE INSTINCT NX V6 FOR PICOFLY HW

    So I set up the hekate firm ware with the instinct NC v6 , but ran into the blue error code and it seems it is faulty. So then I switched the instict V6 for the picoflyHW but got purple screen when loading into the OFW, and when loading EMMCU it says failed to innit Emmcu. Then I went back and...
  14. S

    switch oled mod Kamikazee

    how was your first time experience when doing your first Kamikazee method on the oled switch?
See more