Recent content by Stidwack

  1. Stidwack

    Hardware Is this screen broken?

    A little isopropyl on the screen connector and ribbon cable and maybe some compressed/canned air might help. Otherwise yeah, could be the screen itself.
  2. Stidwack

    Hacking INSTINCT-NX Chip

    Has anyone found documentation on the V6S on how to reset it using the consoles USB-C port? I'm interested in this but have only seen Sthetix's installation and he does not demonstrate that feature in the video (unless he's posted about it since then, haven't looked recently).
  3. Stidwack

    eMMC exchange question

    The basic gist of it is I dumped the SK-Hynix in Hekate first onto microSD, swapped the Hynix with Samsung using hot air station and solder paste with stencil, booted back into Hekate and restored the Hynix dump to the Samsung.
  4. Stidwack

    eMMC exchange question

    It was new, not sourced from another Switch
  5. Stidwack

    eMMC exchange question

    I have swapped an SK-Hynix with a Samsung no problem, same size 64GB and restored the dumped NAND from SK-Hynix onto the Samsung in Hekate.
  6. Stidwack

    Extra check before soldering picofly modchip

    "never soldered things so small" - HIGHLY recommended to do some testing on an old PCB/motherboard before diving into this head first. Example, I had an old graphics card lying around that I practiced on first "is it risky" - ABSOLUTELY. The components on the Switch motherboard are extremely...
  7. Stidwack

    Switch Lite Hwfly No 'boot.dat' Boots OFW

    If by "**" you mean that you're seeing 2 short LED blinks, that is your RST point not connected (B point). I would definitely recheck all the diode readings for your solder points, specifically "B"
  8. Stidwack

    OLED modchip switch black screen

    Is the SD recognized by your computer? do you have a "payload.bin" file on the root of it?
  9. Stidwack

    Hacking Sigpatches for Atmosphere (Hekate, fss0, fusee & package3)

    on your SD card, delete "atmosphere\contents\0100000000001000". If you updated with a custom theme then that's the problem
  10. Stidwack

    Hacking INSTINCT-NX Chip

    good catch. yeah I would clean that up if you haven't already and give it another test after checking all your other points
  11. Stidwack

    Hacking INSTINCT-NX Chip

    If you hold vol+ and vol- together while trying to boot, does it boot to stock firmware? I had an Instinct chip that functioned "fine" as you showed in your video, but there were shorts on the chip itself that, for whatever reason, would not allow the Switch to boot even after going through...
  12. Stidwack

    Hacking INSTINCT-NX Chip

    wrong thread, but hold "boot" while plugging it in
  13. Stidwack

    Hacking switch died after installing modchip, and I need help

    Sounds like you need to bust out a multimeter and test your solder points for shorts. Can you post pictures of your work?
  14. Stidwack

    Picofly AIO Thread

    It glitches the boot process of the Switch in order to run an unsigned payload, eg Hekate. So it accomplishes the same thing but in a different way
  15. Stidwack

    Hacking Sigpatches for Atmosphere (Hekate, fss0, fusee & package3)

    use AIO updater to download the 16.1.0 firmware, then Daybreak to install.
See more
General chit-chat
Help Users
    Veho @ Veho: Click on your profile pic in the top right corner, and you'll get the profile menu popup, with... +1