Recent content by Sendpie

  1. S

    Picofly AIO Thread

    i have an oled that after a picofly install all diode values dropped to half (from 800 to 400). it stopped booting after that. do you have any leads on how this could be fixed?
  2. S

    old 3ds XL delivering 1v to the battery. won't charge.

    got an old 3ds, console turns on, but the battery won't charge and only recieves 1V from the charging pins. checked fuses, both have continuity, getting only 1V on the second fuse/v+ rails.
  3. S

    Picofly AIO Thread

    got the switch working again after swapping m92 out and fumbling the 100k resistors like 5 times
  4. S

    Picofly AIO Thread

    so i looked at it again today, the battery charged a little bit. but now im getting error 2101-0001 (0x265) on both emunand and OFW. there was some hissing sound coming from the apu. really weird considering i used the console for a good amount of time before it shut off. 1735932323 Does anyone...
  5. S

    Picofly AIO Thread

    Having an issue, installed a picofly on a v1 switch, everything was smooth. Console shut down out of nowhere and now all i get is a single pulse blue light from the chip. Found that the ram got pretty toasty upon further inspection. Any leads?
  6. S

    Hacking Hardware Picofly - a HWFLY switch modchip

    how should i go about doing this? sp1 and sp2 show no resistance on gnd and 18 ohms on the other end, gonna desolder the connector and check the mosfets. desoldered the sp connector, my A C D are still halved (400~)
  7. S

    Hacking Hardware Picofly - a HWFLY switch modchip

    another problem, i have a switch that gave proper diode readings ~800 on A C D 3v3, 1.5 on B. after trying to boot up the chip, all readings got halved to ~400 and it seems many caps got shorted on the console, any leads on how i could fix this?
  8. S

    Hacking Hardware Picofly - a HWFLY switch modchip

    heyo, i installed a picofly modchip on an oled switch, (almost) everything works fine but the right joycon rail stopped working after the installation. checked if i broke the line that's right next to the apu shielding but the issue doesn't seem to be there. i have continuity from the point...
  9. S

    Hacking SWITCH NOOB PARADISE - Ask questions here

    is it safe to switch to 9.0.0 now? i have a new system and in order to link a ninty account i have to update.
See more