Recent content by Rodel

  1. Rodel

    Hacking Hardware Picofly - a HWFLY switch modchip

    If that's the case the resistor is too low..change it with 47ohms or if you have rp2040 zero chip.just replace it..
  2. Rodel

    Hacking Hardware Picofly - a HWFLY switch modchip

    If you cannot boot to ofw even if you remove the picofly means your nand is corrupt you need to restore it but if you can boot means the picofly chip is the problem.yes that's the location of the resistor.you need to remove it or add some resistor to dat0 and cmd..clk still 47ohms
  3. Rodel

    Hacking Hardware Picofly - a HWFLY switch modchip

    The problem is the resistor in Dat0/cmd.you need to replace it with 100ohm.because some Chinese clone picofly use 47ohm on dat0/cmd.or you can use 47+47 on dat0 and 47+47 on cmd
  4. Rodel

    Hacking 6400mAh Battery Mod for Switch Results+Guide

    Actually not just 8000mah its 8555mah of total here is my hekate
  5. Rodel

    Hacking 6400mAh Battery Mod for Switch Results+Guide

    Nice.. mine I modded my switch lite with 8000mah.i parallel 2 4000mah battery
  6. Rodel

    Homebrew RELEASE Avatool - Homebrew Tool to Change Avatars

    It works on 16.0.3 and 16.1.0 thanks
  7. Rodel

    What's that chip ? Do i need to flash it or something ?

    You need to hold down the boot button and insert the usb cable and copy the firmware
  8. Rodel

    Misc Android coming to Switch Mariko this year?

    I overclock the cpu to 2.2ghz when playing zelda twilight princess and wind waker it stable at 30fps.i use some gecho codes to run 30fps on hyrule field..here the citra core extract the .nro to retroarch/core
  9. Rodel

    Misc Android coming to Switch Mariko this year?

    I use dolphin mmjr 11505 on android and some tweaks on setting to stable the fps twilight princess and wind waker is playable In switch HOS atmosphere i can play ocarina of time and majoras mask in citra core 1.90 dirty.but I overclock it to max I use switch oled
  10. Rodel

    Misc Android coming to Switch Mariko this year?

    You need to overclock the cpu 2.2ghz and some tweaks and cheats on zelda wind waker and twilight princess and it stable at 30fps even in hyrule field
  11. Rodel

    Hardware Switch thermal mod made cooling worse?

    My switch is still alive till now no issues even I overclock it.and not much hot like the default..but still at your own risk to do this trick
  12. Rodel

    Misc Android coming to Switch Mariko this year?

    You need to format cache partition after you boot in lineage recovery then flash the rom
  13. Rodel

    [SPOILERS AHEAD] Zelda TotK Help thread

    Yes if you done with the main quest Regional Phenomena talk to purah at lookout
  14. Rodel

    [SPOILERS AHEAD] Zelda TotK Help thread

    you need to have main quest Crisis at Hyrule Castle you will find impostor Zelda you see in trailer that link is in castle thats when impostor zelda shows he is Ganondorf.you fight the Phantom Ganon and in the end Ganondorf tell a story how he rule the kingdom with his army
  15. Rodel

    [SPOILERS AHEAD] Zelda TotK Help thread

    All 18 memories
See more