Recent content by razgrizaces

  1. R

    Hacking Hardware Picofly - a HWFLY switch modchip

    I just removed everything and doesn't look like it boots to OFW.
  2. R

    Hacking Hardware Picofly - a HWFLY switch modchip

    I've been soldering for at least 8 years and this is my first console I've ever worked on. I've done plenty of PCB repairs and MCU swaps and other microsoldering fixes on other PCBs. The first Dat0 adapter the customer provided was faulty as it wasn't even reading voltage on it, reading on it...
  3. R

    Hacking Hardware Picofly - a HWFLY switch modchip

    I guess that could also be possible, but there's no way to check unless I were to remove the chip? I can't imagine it would just corrupt if the connection is removed, and the friction piece shouldn't erode the mask. Lemme try removing the dat0 adapter completely and try. Still showing =* on it...
  4. R

    Hacking Hardware Picofly - a HWFLY switch modchip

    I've redone the adapter at least 4-5 times now, with no change in the error code or voltage. I'm guessing I'd have to reball it and while I have done smd resoldering before I'm not super comfortable reballing. Maybe I'll try reflowing with the dat0 adapter in place and see if that'll help...
  5. R

    Hacking Hardware Picofly - a HWFLY switch modchip

    Disconnecting the Dat0 gives me the =* error, indicating Dat0 is not connected.
  6. R

    Hacking Hardware Picofly - a HWFLY switch modchip

    Hey guys, So I've been working on Picofly for a Switch OLED for a client and I'm getting the *=* No eMMC block 0 read (eMMC init failure?) error. I'm 99% sure my connections are all solid, they're all within the values that I've seen on forums. A, C and 3.3 are about 0.8V, and B is >1.2. I did...
See more