Recent content by Ramsaber

  1. R

    Hardware My switch doesn't charge, won't turn on, or is otherwise not functioning at all. Where do I start?

    Ah understood. I would start with p13 and m92 then easiest options for replacing and getting a good result. I would honestly be under the assumption the memory would effect the video and output production. Due to software running the rest od the board. And if your memory is bad it may not have...
  2. R

    Hardware My switch doesn't charge, won't turn on, or is otherwise not functioning at all. Where do I start?

    Ah ok I must have missed that part earlier on I am sorry. I didn't read the previous messages very recently. I am not really sure how to get passed bricked memory. Is that something that is replaceable. Or how were you expecting to fix it.
  3. R

    Hardware My switch doesn't charge, won't turn on, or is otherwise not functioning at all. Where do I start?

    I'll be dead honest I have never seen that before. Very intriguing! Have you tried unplugging the screen and docking the console? To see if it is booting fully or if it's getting stuck on the boot and performing that weird loop. Also when you start your payload does the screen operate correctly...
  4. R

    Hardware My switch doesn't charge, won't turn on, or is otherwise not functioning at all. Where do I start?

    There is... In most cases you shorted either the m92 with power or the p13 with video. I would suggest checking capacitors next to the m92 chip. In most cases the bottom left vertically laid capacitor leads to the p13. If that is shorted you need a new p13. If any others are shorted I would...
  5. R

    Hardware My switch doesn't charge, won't turn on, or is otherwise not functioning at all. Where do I start?

    If you want to check for only a screen and can power it on normally I would suggest checking for sound. I was able to get the device to power on and function to get sound with a bad screen. If you can't get it to boot I am not sure what sounds would come from rcm boot. Someone with more...
  6. R

    Hardware My switch doesn't charge, won't turn on, or is otherwise not functioning at all. Where do I start?

    Ok I definately don't know how to use this site while leaving it open. Didint see any posts besides mine until today. As for checking if something is working you should be able to set it into the dock. You will get slow blink charge until it makes it fill enough to start. When it does if there...
  7. R

    Hardware My switch doesn't charge, won't turn on, or is otherwise not functioning at all. Where do I start?

    Do you have any suggestions for a perfect working switch and no video out to dock? Replaced m92 p13 port three or four times and b24 just cause. auto Not sure why it made three of these
  8. R

    Hardware My switch doesn't charge, won't turn on, or is otherwise not functioning at all. Where do I start?

    Do you have any suggestions for a perfect working switch and no video out to dock? Replaced m92 p13 port three or four times and b24 just cause.
  9. R

    Hardware My switch doesn't charge, won't turn on, or is otherwise not functioning at all. Where do I start?

    Do you have any suggestions for a perfect working switch and no video out to dock? Replaced m92 p13 port three or four times and b24 just cause.
See more
General chit-chat
Help Users
  • No one is chatting at the moment.
    Psionic Roshambo @ Psionic Roshambo: https://www.youtube.com/watch?v=KYZD7ykz9aQ +1