Recent content by Mn3s

  1. Mn3s

    Hacking Booting to hekate without eMMC?

    In theory it should. But if everything works as intended and working new emmc is soldered perfectly, just not yet written, in other words blank, picofly or hwfly can and will boot to hekate for easier flashing.
  2. Mn3s

    Hacking Booting to hekate without eMMC?

    Other people helped alot more than i did, but no problem. Also if you are using aliexpress, i suggest buying new samsung 64gb emmc, they are pretty cheap and will definetly come in handy later ;). Happy waiting !
  3. Mn3s

    Hacking Booting to hekate without eMMC?

    As evil_santa stated before: "you can use a ft232h to write your image to your emmc. It's not necessary to desolder the emmc. Connect dat0, cmd and clk to ft232h, power on your switch and you should be able to write the boot0/boot1 bin files". That black box is used for friction contact, as it...
  4. Mn3s

    Hacking Booting to hekate without eMMC?

    Hi, there is unfortunatly no easy way to rebuild. You have 3 options that i know of. 1. Solder emmc to switch v1, launch hekate and reflash boot partitions. 2. Solder emmc to specific emmc adapter that can refash partitions (linux environment) 3. Use ft232h programmer as it is stated post...
  5. Mn3s

    Hacking Booting to hekate without eMMC?

    That would be the hard way, 3 times to unsoldering, 2 times raball. Most of the time these emmc cant even handle 1 reball. Also i think i will use V1 switch for flashing full disk image via hekate, but again, alot of hot air desoldering. So I guess thats the way. Why pico is unable to glitch in...
  6. Mn3s

    Hacking Booting to hekate without eMMC?

    I realy doubt that emmc is defective. Maybe this blank emmc have 8 mb boot partitions and picofly doesnt like that. Or maybe there is no boot partitions at all, but i dont think thats possible.
  7. Mn3s

    Hacking Booting to hekate without eMMC?

    Readings are within normal range, Emmc is Samsung KLMCG4JETD 64gb. Tried to reflash pico with 2.73FW, also tried completly new rp2040 zero with picofly 2.74FW. Both ways still gives *=* error two times. PC recognizes switch in rcm mode, indicating that emmc works, but there is missing valid...
  8. Mn3s

    Hacking Booting to hekate without eMMC?

    Is this possible only on V2, or also on oled. Asking because after changing sk hynix emmc to a samsung blank one, picofly gives *=* error without further succes.
See more