Recent content by meeebro

  1. meeebro

    Hacking Hardware Picofly - a HWFLY switch modchip

    Ok bad news, tried the yellow dat0 adapter instead of the OAT0 I was using before and I still get the failed to init emmc error. Reading is once again 0.7v. Anything else that I could be doing wrong?
  2. meeebro

    Hacking Hardware Picofly - a HWFLY switch modchip

    I have the crappy OAT0 adapter, tried cutting the red area first, still get 0.720 V and the error. I cut the left as well and a little of the other corner to move it more right and I still get 0.72v and the error. At least the switch boots into stock HOS still. I guess I will wait for a new...
  3. meeebro

    Hacking Hardware Picofly - a HWFLY switch modchip

    Hi, I have been getting this error code on a new picofly install: =*** eMMC init failure I have been reading 0.7V on dat0, but I reseated the adapter just in case and I still get the error. If I disconnect dat0 from the picofly i get =* D0 is not connected instead. Is this a sign of a bad...
See more