Recent content by LPRM

  1. LPRM

    Purple/pink screen OLED after HWFLY install

    Did you manage to solve the issue? I got purple screen too, then just resolder cmd and it worked partially. I can't boot to OFW,, but managed to copy create emummc anyway. So cfw works. OFW just black screen.
  2. LPRM

    Tutorial Fixed a Purple Screen of (Death)

    I redid point A, OFW gives me a black screen now. I manage to backup emmc in slower mode and create emuemmc. If I go to emmc info sometimes it is in slower mode, after some time it's ok. Still no OFW boot, only a black screen after Nintendo logo. For now I will leave this as it is, I don't need...
  3. LPRM

    Tutorial Fixed a Purple Screen of (Death)

    I installed the modchip yes,then I got Purple screen booting in ofw. If I remove the modchip I have purple screen too. So its only the cmd? It's a 4.7k resistor, right?
  4. LPRM

    Tutorial Fixed a Purple Screen of (Death)

    Did you solve your problem? If so, how?
  5. LPRM

    B point issue after modding Switch OLED

    I tested on my oled. No beeps to the yellow one and that yellow one side is ground.
  6. LPRM

    B point issue after modding Switch OLED

    Test B point on the usb shield. Does it beep?
  7. LPRM

    B point issue after modding Switch OLED

    Does it beep on diode mode or only shows 0? Some Multimeter does not show readings on point B, so if you have no beep it should be good.
  8. LPRM

    Hacking INSTINCT-NX Chip

    I know, but the seller I bought mine does not sell them anymore and he's giving me a rp2040 for replacement. I don't know what to try more with my instinct nx.
  9. LPRM

    Hacking INSTINCT-NX Chip

    I have the instinct black version, but seller is replacing mine with the rp2040 as he no longer sells it.
  10. LPRM

    Hacking INSTINCT-NX Chip

    You can see in the thread that I created the log I got from the PC and all the values of all the solder points. I tried everything in diagnostic mode. Also in the log you can see that the emmc cid is there: Seller sent me an rp2040 version as he no longer sells instinctnx, I'm waiting for it to...
  11. LPRM

    Hacking INSTINCT-NX Chip

    I've changed the cable to dat0 adapter to a thicker one. Got the same readings and same red led blinking. I've attached some log pics.
  12. LPRM

    Hacking INSTINCT-NX Chip

    Thank you. I saw that video too that's why I changed the dat0 adapter. I use the dame type of wire that he uses, I will try a thicker one.
  13. LPRM

    Hacking INSTINCT-NX Chip

    I had exactly the same problem as seen in your video. I redid all the solder points with wire instead of the flex. No fix. What do you think fixed yours?
  14. LPRM

    Hacking InstinctNX OLED not working

    Hi, I installed InstinctNX(black version) on my OLED, it starts training (Flashes yellow slowly), then flashes purple slowly, and finally flashes red 4 times. After this, the Nintendo logo appears on the screen and disappears not booting to OFW. It only boots to ofw if I unplug the flex cable...
See more
General chit-chat
Help Users
    SylverReZ @ SylverReZ: @E1ite007, I just found this randomly.