Recent content by LeGenD_ArMoUR_

  1. L

    Hacking modded switch stuck on black screen, need help

    Inject a payload through TegraRCM and see if it boots
  2. L

    Switch OLED EMMC dead/Rebuild?

    I have a switch OLED board thats come to my bench that had an hwfly mod installed, however they tried to reflow the emmc to get a permanent line and bodged it.. when its been taken off and cleaned the pads on emmc have been stripped therefore rendering the emmc useless. My question is can i put...
  3. L

    Hacking Hardware Picofly - a HWFLY switch modchip

    possible to use SX-Core v1 cables on a v2 unit or more specifically use the mosfets from the ribbons i have about 40 of these sat in boxes id love to make use of? thanks
  4. L

    Hacking Hardware Picofly - a HWFLY switch modchip

    Can you show a picture of your pinout on a mariko. I'm using the standard hwfly pinout for an oled chip
  5. L

    Hacking Hardware Picofly - a HWFLY switch modchip

    I'm maybe thinking the issue lies somewhere with the firmware as it seems to be running fine on a lite but as soon as its run on a v2 mariko we're getting the dat0 error?
  6. L

    Hacking Hardware Picofly - a HWFLY switch modchip

    I'm running mine manually as well but nothing
  7. L

    Hacking Hardware Picofly - a HWFLY switch modchip

    Still fails to read dat0 with resistor/resistors removed
  8. L

    Hacking Hardware Picofly - a HWFLY switch modchip

    So I'm running this on a v2 mariko everything is fine other than the dat0 point it's soldered fine but orange blink after white says its not. Is there anything I've missed? wire is connected to 47ohm resistor but no matter how much I try and redo it it still fails to read.
  9. L

    Hacking ROM Hack Pokemon Scarlet & Violet Cheat Database

    addresses reset every time the game reboots so codes found through edizon are only good for the person looking for them, saving and converting them for other people will simply not work.
  10. L

    OLED specific chip pinout

    does anyone know where the swdio pin goes to on the oled specific hwfly, had a bricked chip and transplanted the chip from another dead chip but the pad under swdio has lifted and came away so need to know where to run a jumper to to save the chip. Pics attached
  11. L

    Tutorial How to flash the HWFLY Clone chips

    Thanks for that just ordered some
  12. L

    Tutorial How to flash the HWFLY Clone chips

    I have a hwfly here, but those two circled burned themselves off the board, anyone know what they are? If I can fix those ill be able to give this a go myself as this is a trash chip now..
  13. L

    Tutorial How to flash the HWFLY Clone chips

    Look at your 103 resistor it's been knocked off fix that and try again
  14. L

    Switch OLED teardown V1/V2

    Make sure if your using enamelled wire to fully take off the coating before soldering your connections otherwise it ain't gonna read the points properly, red almost always means a bad connection. I had 60 seconds flashing blue then to red and it was my dat0 connection was coming away as I put...
  15. L

    ROM Hack Pokemon Brilliant Diamond & Shining Pearl Cheat Database

    60 fps mod works amazingly on the switch OLED that screen just brings the whole console to life. Kudos