Recent content by KingMo5h

  1. K

    Hacking Hardware Picofly - a HWFLY switch modchip

    For the people who are searching for good oled dat0 pcbs, I ordered here: https://vi.aliexpress.com/item/1005005537441264.html?spm=a2g0o.order_detail.order_detail_item.3.1a50f19crRcduK&gatewayAdapt=glo2vnm They sell 2 different ones, the bad Oat0 ones and Dat0 V6. I ordered the V6, i will report...
  2. K

    Hacking Hardware Picofly - a HWFLY switch modchip

    I have the equipment but i dont want to do it :D to much efford is needed. Just sticking and adapter in it is way easier, just need to find a good one or prep the bad ones.
  3. K

    Hacking Hardware Picofly - a HWFLY switch modchip

    Can somebody recomment me a seller that sells the good ones? I always end up getting the bad ones.
  4. K

    Hacking Hardware Picofly - a HWFLY switch modchip

    I dont understand what i can do with the files in the github. Never seen such structure for PCB files. Can you tell me how i can open them?
  5. K

    Hacking Hardware Picofly - a HWFLY switch modchip

    It has no sideeffects, just remove it. You only need it for powering through USB, since its desoldert, no need to be on the board.
  6. K

    Picofly AIO Thread

    Normaly the most used value for the pull down resistor is between 5k and 10k. I never saw someone using any deep calculation for this. Have done a few electronic layouts with 10k ohm, was never an issue.
  7. K

    Picofly AIO Thread

    Good calculation! If im not mistaken the Rp2040 only gives 3.3V out not 20V on the gate.
  8. K

    Hacking Hardware Picofly - a HWFLY switch modchip

    Yes should work, 0.2mm fits fine.
  9. K

    Hacking Hardware Picofly - a HWFLY switch modchip

    It is glitching. I only dont have a picture while on. Regarding the cables and mosfets, I had them laying around thats why i used them. I tested it already with one, changed to 2 and then to 3. Cause in the installation instruction was it mentioned, that maybe 2 will solve this problem. But also...
  10. K

    Hacking Hardware Picofly - a HWFLY switch modchip

    Here are some pictures. But this one was a test if its working, thats why its a mess but conections are good. no shorting or anything. also one cable is ripped of...happend while making the photos...:D Also this is with 3 mosfets now, cause i had forget to set the pico to rgb mode and got before...
  11. K

    Hacking Hardware Picofly - a HWFLY switch modchip

    checked but found nothing sadly :(
  12. K

    Hacking Hardware Picofly - a HWFLY switch modchip

    Yes it is a light but i dont have disconnected any connection, i guess :D
  13. K

    Hacking Hardware Picofly - a HWFLY switch modchip

    Anyone know the problem when it glitches blue..white..then green but screen ist black just with backlight on and know what is wrong? Also it is black with backlight on when i start without pico connected. V.2.7 is glitching good too but same black screen with backlight on. And yes, also put a...
  14. K

    Hacking Hardware Picofly - a HWFLY switch modchip

    Where is it exactly on the lite? On the back? Trying to glitch with other mosfets but its not working, maybe with this itll work.
  15. K

    Picofly AIO Thread

    Yes ordered a few samples from jlcpcb. Waiting for them to arrive.
See more