Recent content by juanvlc

  1. J

    So so close - Hwfly not glitching

    You destroyed the anchor at the nand shield and the adapter barely touches the ball. Do not use this shitty black adapters Tray to push the adapter against the ball while you glue the adapter to the board, keep the pressure until it dries Do not try to do kamikaze whith your soldering...
  2. J

    Hardware Only HDMI output after exposing DAT0

    Check your screen connector for bend pins
  3. J

    Hekate fails to read battery info after Picofly Installation

    Battery gauge ic
  4. J

    Hacking Best practice for preserving Switch 2 exploitability?

    if sd is formatted in fat32 you don´t need to update update only trigers if sd is in exfat, it needs to download the driver
  5. J

    Hardware SD Card Failed To Init SD Card Reader Not Properly Seated

    its almost allways the motherboard sockect, check the pins base, normally one or several are cracked. Replace the socket, heat from the bottom if not you will melt plastic connectors
  6. J

    Rp2040 OLED error code help!

    thank a lot
  7. J

    Rp2040 OLED error code help!

    1723511662 Sorry mate, does this reader works on windows? Thanks
  8. J

    Hacking OLED V6 Chip Black screen

    NO_EMMC_COMM Recheck all your points
  9. J

    Hacking Hardware HWfly-shaped Picofly boards start shipping in China

    Sorry, I'm in holidays, not at home and poor phone coverage Regarding 1st batch hwfly rp2040 core, I noticed this desing fault after installation of several units, doing the emuMMC with back cover closed the console went black screen and restarted. Then noticed when pressing back cover same...
  10. J

    Hacking Hardware HWfly-shaped Picofly boards start shipping in China

    Be careful, I found in several units that have a bad design that causes a short between chip and emmc. This can be fixed isolating with tape the chip and emmc module also. This bad desing was fixed in the "new" batch Also the new batch are poorly finished with emmc socket displaced to the right...
  11. J

    Hacking Hardware HWfly-shaped Picofly boards start shipping in China

    https://media.ccc.de/v/c4.openchaos.2018.06.glitching-the-switch I really like this video Best regards
  12. J

    Hacking Hardware Picofly - a HWFLY switch modchip

    Hi there, sorry for my lately answer i was sleeping so deep... English is not my mother language also, dont worry at all. Please, read my post again slowly, i said 100% success and 0 complaints. If you need to reball every time just do it, you are free, but i don´t need it. I doesn´t have ant...
  13. J

    Hacking Hardware Picofly - a HWFLY switch modchip

    Wait a bit mate....if you don't have the skills to install correctly w/o reballing is not my business. In my country we will cal you handless. More than 1 thousand oled clients happy and my success is 100%. I offer lifetime warranty, don't needed but I do. In the other side, seller sells 1 thing...
  14. J

    Hacking Hardware Picofly - a HWFLY switch modchip

    I've opened a dispute and will leave a bad review for sure, but that is useless. Seller only will accept refund if I return the goods to China so money is lost. Also, he will close the sell and will open a new one and continue scamming buyers. That's the way greedy Aliexpress sellers acts. I...
  15. J

    Hacking Hardware Picofly - a HWFLY switch modchip

    Easy to see what is the dangerous one right? Several times discussed here U´r wellcome
See more