Recent content by JoTiK

  1. JoTiK

    Hacking Hardware Picofly - a HWFLY switch modchip

    I used awg 38 too and it works well
  2. JoTiK

    Hacking Hardware Picofly - a HWFLY switch modchip

    According to led indication PURPLE = eMMC boot failure, check CMD / CLK
  3. JoTiK

    Hacking Hardware Picofly - a HWFLY switch modchip

    Yes that’s the same trace
  4. JoTiK

    Hacking Hardware Picofly - a HWFLY switch modchip

    It shouldn't be beeping, the trace is shorted for sure but you have to determine if it's because of the capacitor or something else that went wrong. If you are comfortable with micro soldering you can remove the capacitor and check if the short is still present on the motherboard
  5. JoTiK

    Capacitors value nintendo switch oled

    I know that the ones located where you install the hwfly cpu flex are 1uF 20% 6.3V 0201 1681166822 After a little research they're all the same apparently. 1uF 20% 6.3V 0201
  6. JoTiK

    Hacking Hardware Picofly - a HWFLY switch modchip

    I can see a solder blob on the bottom of the capacitor, if you soldered it here, this is the wrong side of the capacitor and you shorted your rp2040 If you had soldered it well try to remove everything and try to boot Check if your capacitor is shorted
  7. JoTiK

    Hacking Hardware Picofly - a HWFLY switch modchip

    As hard as soldering a picofly, the flex is better integrated though. And it must fit without cutting the shield
  8. JoTiK

    Hacking Hardware Picofly - a HWFLY switch modchip

    You learnt from your mistakes, practice makes perfect. But I noticed that the picofly brought a lot of new people who want to install the chip themselves, don't start with this modchip as your first project, train yourself on broken stuff first and of course use flux
  9. JoTiK

    Hacking Hardware Picofly - a HWFLY switch modchip

    As far as I know Yes once the picofly is setup there is no difference except bugs maybe
  10. JoTiK

    Hacking Hardware Picofly - a HWFLY switch modchip

    Thanks
  11. JoTiK

    Hacking Hardware Picofly - a HWFLY switch modchip

    Does 2.61 need unlock.uf2 ?
  12. JoTiK

    Hardware New 2ds xl turns off exactly when i press ZL

    It come from a connector on the motherboard (circled in red on the picture) The connector was bent a bit during disassembly so the cable didn't fit properly. Because of the location of the connector(the button touches the ribbon cable), every time I pressed ZL the connector moved and caused a...
  13. JoTiK

    Hardware New 2ds xl turns off exactly when i press ZL

    Hello I have exactly the same problem on my 2ds xl, I changed the screen today and the zl button turn off the console with this sound coming from the speakers I don't know if the problem was there before because I bought the console broken and i didnt test it
  14. JoTiK

    Hacking SeedMiner FC and Mining Help

    Hello thanks for this guide. If someone wants to help me . My friend code is : 0233-3629-0006 My ID0 is : 2740f4757b88163e3106287fc0f162a2
See more