Recent content by GoodFellas

  1. GoodFellas

    Hardware Need help—I need to know which specific points the PSP 1000 joystick contacts connect to.

    I finally found that contact 3 leads to a capacitor and a transistor, which supply power to the joystick. I was misled by what I found on Google.It was actually normal for it to have no resistance reading. In the end, I fixed the issue by connecting four wires directly to the joystick...
  2. GoodFellas

    Hacking Hardware Misc Switch oled shorted and not booting after picofly install

    Try installing a known-good MAX77620H and observe whether the noise persists. While this chip generates multiple voltage rails, the issue specifically involves the 3.3V line—which eventually outputs correctly—so the fault might not lie with the chip itself but could be located somewhere along...
  3. GoodFellas

    Hacking Hardware Misc Switch oled shorted and not booting after picofly install

    Red LED? What version of the firmware are you using? If the motherboard is making noise, it is highly likely there is a short circuit. Check whether the 3.3V rail is being generated correctly—is there any instability or fluctuation?
  4. GoodFellas

    Hardware Need help—I need to know which specific points the PSP 1000 joystick contacts connect to.

    I need help. I found that contact 3 has no resistance reading, while the other three contacts show normal resistance values. So, I scraped into the second PCB layer at this contact, but it still reads no resistance, leading me to conclude that there's an internal trace break within the board...
  5. GoodFellas

    Hardware Right Joy-Con insertion animation missing

    I encountered the same problem.
  6. GoodFellas

    Does anyone know the value of this resistor and capacitor next to the LCD connector ?

    100NF and 2.2K
  7. GoodFellas

    Help identifying this OLED capacitor.

    The tested voltage is 1.9V, so using a 0201 470nF 6.3V capacitor is safe.
  8. GoodFellas

    Help identifying this OLED capacitor.

    0201 470nf
  9. GoodFellas

    Error 2123-0011 when launch some games.. How to solve it?

    I am not a robot.
  10. GoodFellas

    Launch games in wifi 21.0.0

    https://github.com/Atmosphere-NX/Atmosphere/issues/2664 just add that line above to your atmosphere/config/system_settings.ini file and reboot, then the problem will go away. default_auto_upload_global_setting = u8!0x0
  11. GoodFellas

    Hardware New 3DS LL Home Button doesn't work

    bridge
  12. GoodFellas

    Hardware New 3DS LL Home Button doesn't work

    Have you tried this?
  13. GoodFellas

    is it possible to recover saves from sdcard to a fresh hacked switch

    If you have backed up prod.keys, you can retrieve the archive.
  14. GoodFellas

    Received a mariko switch with mod chip installed

    This is an older chip, you need to update the memory card file. https://github.com/Atmosphere-NX/Atmosphere/releases https://github.com/CTCaer/hekate/releases
  15. GoodFellas

    Pls Help Can't find the SD card Anymore, THEN?

    You need a new TF card
See more