Recent content by Crung

  1. Crung

    Hacking Hardware Picofly - a HWFLY switch modchip

    I did a reflow and it fixed it. For some reason, my solder balls always crack after 1 month or so. Sometimes less. I dont know what i did wrong. I have reballed this emmc chip twice ,and 2x reflows. The solder balls still crack
  2. Crung

    Hacking Hardware Picofly - a HWFLY switch modchip

    im not using any flex. its done with wire. Front mosfet install. 30 awg wire. mosfet is "glued" to the cap (glued as in next to)
  3. Crung

    Hacking Hardware Picofly - a HWFLY switch modchip

    any help with this?
  4. Crung

    Hacking Hardware Picofly - a HWFLY switch modchip

    OLED rp2040. First had a permanent dat0 . This method failed 1 month later. Reballed the emmc again, and did kamikaze. Worked for 2 weeks, and now its stuck in infinite glitch === Glitch attempt limit reached .Desoldering the 3.3v and GND from picofly and attempting to boot it "stock" wont...
  5. Crung

    Hacking Hardware Picofly - a HWFLY switch modchip

    Can you send a link where you got your mosfet on ali? I think we have same mosfets (same packaging) and i am having the SAME problem BUT i already closed the diode . Still same problem ==*. Using different mosfet (from a flex) glitches fine . This is what i have IRH8342...
  6. Crung

    Hacking Hardware Picofly - a HWFLY switch modchip

    That is because you re measuring the cap not the mosfet. Because the path from Drain>Wire>cap>wire>source is lower
  7. Crung

    Hacking Hardware Picofly - a HWFLY switch modchip

    Anyone experienced this before? Whenever i boot to OFW/CFW/turn off console while in hekate i get this line for 0.01 seconds. What is the cause? I dont get this in OFW/CFW while screen is black (turned on,like loading game). Pins in the display connector looks great,and the cable also?
  8. Crung

    Picofly AIO Thread

    try using 30 awg wire for ground and 3.3v. Actually no. What exactly is your problem? The chip, 1 out of 10 times, doesnt turn on -> power on OFW? Or does it give out error and then power OFW?
  9. Crung

    Hacking Hardware Picofly - a HWFLY switch modchip

    yeah i know more or less ,just wanting to clear my paranoia. Its still shocking you know, that you can fk up a board in an instant. 1708110792 By the way, any of you guys had problems with consoles where you forgot to put the thermal pad back on the charging chip?
  10. Crung

    Hacking Hardware Picofly - a HWFLY switch modchip

    yes i agree but its really hard to get my tool in there without scratching apu
  11. Crung

    Hacking Hardware Picofly - a HWFLY switch modchip

    Never doing this method again. First time it happens and i alsmout shit myself. In the future ill just stop beeing lazzy and put low solder on it and heat it with the iron till it comes loose. How bad is it? I can see second layer . I ve looked at scans and there doesnt seem to be anything there...
  12. Crung

    Hacking Hardware Picofly - a HWFLY switch modchip

    yes i had the wrong value. its a 1k ohm resistor.
  13. Crung

    Picofly AIO Thread

    oh ok i was under the impression that was a 0 ohm resistor . i remember v2 flexes have 2 resistors and a 0 ohm resistor. ok so i need a 0.5-1k. Understood if wire come loose its a problem indeed. but that wont ever happen in my installs. i secure the wires. For example,what if the picofly goes...
  14. Crung

    Hacking Hardware Picofly - a HWFLY switch modchip

    Im double posting my question in this thread since it has more people: Question regarding mosfet installs and 0 ohm resistors. Someone pointed out that with the mosfet route you have no failboat if there is a problem, and the mosfet could pump current and fry the apu. HM. Educate me. The mosfet...
  15. Crung

    Picofly AIO Thread

    have you looked at the documentation before doing the install?. the lights can be used to diagnose the problem.... to read the error, only look for the yellow light. its going to give you 3 sequences . aka its going to give out error,pause, then error again, pause , then error again before...
See more
General chit-chat
Help Users
    Psionic Roshambo @ Psionic Roshambo: https://www.youtube.com/watch?v=dZbUuSmFgMo